Author Topic: My Daytona clone project...  (Read 3748 times)

0 Members and 1 Guest are viewing this topic.

Offline Mad Max

  • certified 'Imagineer' - "...there is no box..."
  • RCC Nut
  • *******
  • Posts: 13181
  • Gender: Male
  • USAF Retired
Re: My Daytona clone project...
« Reply #50 on: September 29, 2020, 08:09:30 am »
...a perfect arrangement - I'm very envious {cool}
2002 Dakota Quad Cab 4x4 - 440/46rh/Atlas4/D60/14b/40s
2007 Cummins Ram 3500 Megadually 4x4 "Big Mack" - 5.9/G56 6-speed
2016 Durango Citadel AWD - 5.7 Hemi/8-spd auto
1952 Willys M-38 "Poncho"

                .there's always a way...

                       ...Molon Labe...

RamChargerCentral

  • Advertisement
  • ***

    Offline KurtfromLaQuinta

    • Mopar Nut
    • ******
    • Posts: 6170
    • Gender: Male
    • My lugnuts take more torque than Honda's put out.
    Re: My Daytona clone project...
    « Reply #51 on: September 29, 2020, 02:30:42 pm »
    ...a perfect arrangement - I'm very envious {cool}
    Your kids will grow up quicker than you think. Then you'll have some help.
    Either that or more enemies.  ;D
    500 c.i.- Scat Crank, Scat Rods, Indy Aluminum heads, Comp XR280HR Cam, Six-Pack, Milodon 8 qt. Pan, 727  (reverse-manual, low band apply, 5 clutch disc, 3 qt. xtra. pan), N.P. 205, Ford 9" rear axle (4:11, 31 spline axles, Detroit Locker, converted/ disc brakes). Dana 44 front (converted/ disc, 4:10, Tru-Trac limited slip). Hydra Boost Brake Booster, Gear Vendors OD. 600+ ft. lbs. of torque

    Offline Mad Max

    • certified 'Imagineer' - "...there is no box..."
    • RCC Nut
    • *******
    • Posts: 13181
    • Gender: Male
    • USAF Retired
    Re: My Daytona clone project...
    « Reply #52 on: September 29, 2020, 05:40:14 pm »
    no doubt - I just hope I'll still be able to play around in all these shenanigans when they do...  :P ;D
    2002 Dakota Quad Cab 4x4 - 440/46rh/Atlas4/D60/14b/40s
    2007 Cummins Ram 3500 Megadually 4x4 "Big Mack" - 5.9/G56 6-speed
    2016 Durango Citadel AWD - 5.7 Hemi/8-spd auto
    1952 Willys M-38 "Poncho"

                    .there's always a way...

                           ...Molon Labe...

    Offline mopar65pa

    • DODGE TRUCK PARTS COLLECTOR
    • Ultimate RCC Member
    • *********
    • Posts: 52597
    • Gender: Male
    • I NEVER CLAIMED TO BE ANYTHING BUT KNUTTS!
    Re: My Daytona clone project...
    « Reply #53 on: September 29, 2020, 06:10:23 pm »
    Your kids will grow up quicker than you think. Then you'll have some help.
    Either that or more enemies.  ;D

    My kids grew up and didn't want to do it without me.  :'( BUT they want the trucks..............  And NO I didn't teach them that way!
    I'd rather push a DODGE than drive a chevy or a ford!!!!!!
    77 400/727 RC
    79 360/727 RC
    80 318/435 TD
    93 CTD W250 club cab
    73 Charger SE 400/727 
    02 883R HD
    01 Elecrta HD
    88 W250 5 speed plow truck
    2000 CTD 5 speed ext cab short bed Wife's truck
    2002 Durango work beater
    2000 Durango blown head gaskets
    Quote
    Ted Nugent called and he wants your shirt back! http://www.youtube.com/watch?v=HFduVeNE

    Offline KurtfromLaQuinta

    • Mopar Nut
    • ******
    • Posts: 6170
    • Gender: Male
    • My lugnuts take more torque than Honda's put out.
    Re: My Daytona clone project...
    « Reply #54 on: September 29, 2020, 11:38:35 pm »
    My kids grew up and didn't want to do it without me.  :'( BUT they want the trucks..............  And NO I didn't teach them that way!
    Warranty's only last so long...
    500 c.i.- Scat Crank, Scat Rods, Indy Aluminum heads, Comp XR280HR Cam, Six-Pack, Milodon 8 qt. Pan, 727  (reverse-manual, low band apply, 5 clutch disc, 3 qt. xtra. pan), N.P. 205, Ford 9" rear axle (4:11, 31 spline axles, Detroit Locker, converted/ disc brakes). Dana 44 front (converted/ disc, 4:10, Tru-Trac limited slip). Hydra Boost Brake Booster, Gear Vendors OD. 600+ ft. lbs. of torque

    Offline KurtfromLaQuinta

    • Mopar Nut
    • ******
    • Posts: 6170
    • Gender: Male
    • My lugnuts take more torque than Honda's put out.
    Re: My Daytona clone project...
    « Reply #55 on: October 10, 2020, 09:02:25 pm »
    Look what showed up today...



    My son couldn't wait to get started...


    500 c.i.- Scat Crank, Scat Rods, Indy Aluminum heads, Comp XR280HR Cam, Six-Pack, Milodon 8 qt. Pan, 727  (reverse-manual, low band apply, 5 clutch disc, 3 qt. xtra. pan), N.P. 205, Ford 9" rear axle (4:11, 31 spline axles, Detroit Locker, converted/ disc brakes). Dana 44 front (converted/ disc, 4:10, Tru-Trac limited slip). Hydra Boost Brake Booster, Gear Vendors OD. 600+ ft. lbs. of torque

    Offline stftruck

    • RCC Rookie
    • **
    • Posts: 274
    • RCC Rules!
    Re: My Daytona clone project...
    « Reply #56 on: October 10, 2020, 11:13:09 pm »
     {drool} {drool} {drool} {drool}

    Offline jungle

    • Vendor
    • RCC Nut
    • *
    • Posts: 11192
    • Gender: Male
    • RCC Rules!#1 site on the net. I was born to Build
    Re: My Daytona clone project...
    « Reply #57 on: October 11, 2020, 08:56:43 am »
    SWEET
    Jim
    1988 RC.the gold one   pics
    1988 RC.440,4" lift,727 
    BIG BLOCKS RULE !!!!!!!
    440 pics

    Offline Mad Max

    • certified 'Imagineer' - "...there is no box..."
    • RCC Nut
    • *******
    • Posts: 13181
    • Gender: Male
    • USAF Retired
    Re: My Daytona clone project...
    « Reply #58 on: October 11, 2020, 09:09:12 am »
    {drool} {drool} {drool} {drool}

    SWEET
    Jim

    ...uhhhmmm yeah what those guys said...plus
    FARGIN' AWESOME!!
    « Last Edit: October 11, 2020, 09:10:44 am by Mad Max »
    2002 Dakota Quad Cab 4x4 - 440/46rh/Atlas4/D60/14b/40s
    2007 Cummins Ram 3500 Megadually 4x4 "Big Mack" - 5.9/G56 6-speed
    2016 Durango Citadel AWD - 5.7 Hemi/8-spd auto
    1952 Willys M-38 "Poncho"

                    .there's always a way...

                           ...Molon Labe...

    Offline 712edf

    • Full Member
    • ****
    • Posts: 1507
    • Gender: Male
    Re: My Daytona clone project...
    « Reply #59 on: October 11, 2020, 10:28:07 am »
    Not sure about your choice in wheel/tires. ;D

    Bucky
    1975 W600   318  NP540  T223Rockwell tcase, Rockwell front & rear axles, 6.8 ratio

    Offline KurtfromLaQuinta

    • Mopar Nut
    • ******
    • Posts: 6170
    • Gender: Male
    • My lugnuts take more torque than Honda's put out.
    Re: My Daytona clone project...
    « Reply #60 on: October 11, 2020, 10:36:26 am »
    The brakes I got are the "Mid Sized". And they are huge. They require a minimum of an 18" wheel. 
    The "Full Size" need 20" wheels for clearance. I really wanted to run 15" wheels. But then I could only run the "Basic" disc setup.
    500 c.i.- Scat Crank, Scat Rods, Indy Aluminum heads, Comp XR280HR Cam, Six-Pack, Milodon 8 qt. Pan, 727  (reverse-manual, low band apply, 5 clutch disc, 3 qt. xtra. pan), N.P. 205, Ford 9" rear axle (4:11, 31 spline axles, Detroit Locker, converted/ disc brakes). Dana 44 front (converted/ disc, 4:10, Tru-Trac limited slip). Hydra Boost Brake Booster, Gear Vendors OD. 600+ ft. lbs. of torque

    Offline Elwenil

    • Mopar Parts Manager
    • Global Moderator
    • RCC Addict
    • *****
    • Posts: 30051
    • Gender: Male
    • Better to be a Wolf of Odin than a lamb of god.
    Re: My Daytona clone project...
    « Reply #61 on: October 11, 2020, 10:38:49 am »
    After looking at the cost of the chassis, I am curious how that would compare to just going with a full chassis and cage and just hang the body panels on it.  Either way I am jealous beyond measure.

    So I saw where you were going with an Elephant for power, but what transmission?  Are you planing on a road race style car, drag race or just all around street car?
    L.Clemons

    1988 Ramcharger AW450-318EFI-NP435 4 speed-NP205 Transfer Case-Dana 60s-Braden Wormdrive Front Winch

    2018 Ram 2500HD Crew Cab 4WD 5.7L

    I am the unknown Will,
    The Anger that threatens glory and ruin:
    Lord of Storms am I,
    in heaven high and caverns deep.
    I am the Father of the War,
    Odin for you, Wotan for him,
    Wayfarer, Wanderer, beggar, king,
    numen, genius, strength and ring.

    Offline KurtfromLaQuinta

    • Mopar Nut
    • ******
    • Posts: 6170
    • Gender: Male
    • My lugnuts take more torque than Honda's put out.
    Re: My Daytona clone project...
    « Reply #62 on: October 11, 2020, 10:45:34 am »
    Not sure about your choice in wheel/tires. ;D

    Bucky
    That's been a concern from the start.
    I'm going to get these wheels... https://us-mags.com/baja-u644-w-13698.htm
    They come in a large variety of sizes and backspacings.
    I'm going with a satin black power coating.
    I really wanted to go this route... https://www.summitracing.com/parts/BSW-D58DC3?seid=srese1&gclid=EAIaIQobChMI2uej---s7AIVax-tBh00HgCJEAYYASABEgJ3nfD_BwE 
    The old NASCAR look. But the size limitations killed that.

    For tires I'm getting these... https://www.goodyear.com/en-US/tires/eagle-f1-super-car
    500 c.i.- Scat Crank, Scat Rods, Indy Aluminum heads, Comp XR280HR Cam, Six-Pack, Milodon 8 qt. Pan, 727  (reverse-manual, low band apply, 5 clutch disc, 3 qt. xtra. pan), N.P. 205, Ford 9" rear axle (4:11, 31 spline axles, Detroit Locker, converted/ disc brakes). Dana 44 front (converted/ disc, 4:10, Tru-Trac limited slip). Hydra Boost Brake Booster, Gear Vendors OD. 600+ ft. lbs. of torque

    Offline KurtfromLaQuinta

    • Mopar Nut
    • ******
    • Posts: 6170
    • Gender: Male
    • My lugnuts take more torque than Honda's put out.
    Re: My Daytona clone project...
    « Reply #63 on: October 11, 2020, 11:00:08 am »
    After looking at the cost of the chassis, I am curious how that would compare to just going with a full chassis and cage and just hang the body panels on it.  Either way I am jealous beyond measure.

    So I saw where you were going with an Elephant for power, but what transmission?  Are you planing on a road race style car, drag race or just all around street car?
    I looked into that. It might have been cheaper initially, but with this system, all the fabbing has been done. So the thinking and time consuming work isn't needed. Way faster.  Still going with a full cage rated for over 200 at Bonneville.  I'm leaning the "Pro Street" direction here. I want to drive this thing all over the place.  Looking to a built 4L75E automatic.
    I really want to use this car. So, yes to all the above. I'll be curious what it can do at a drag strip. But that won't be the biggest interest. Road racing will also be a curious venture. In fact, my ex son in law has been in my gun sight's for a while with his "race Daytona" he built a few years ago. He's a terror at Willow Springs. So somebody has to put him in his place.  I told him one day I'll be able to outspend him.  ;D
    « Last Edit: October 11, 2020, 11:01:49 am by KurtfromLaQuinta »
    500 c.i.- Scat Crank, Scat Rods, Indy Aluminum heads, Comp XR280HR Cam, Six-Pack, Milodon 8 qt. Pan, 727  (reverse-manual, low band apply, 5 clutch disc, 3 qt. xtra. pan), N.P. 205, Ford 9" rear axle (4:11, 31 spline axles, Detroit Locker, converted/ disc brakes). Dana 44 front (converted/ disc, 4:10, Tru-Trac limited slip). Hydra Boost Brake Booster, Gear Vendors OD. 600+ ft. lbs. of torque

    Offline stftruck

    • RCC Rookie
    • **
    • Posts: 274
    • RCC Rules!
    Re: My Daytona clone project...
    « Reply #64 on: October 11, 2020, 11:14:24 am »
    Not sure about your choice in wheel/tires. ;D

    Bucky

    He lives in the "Old West"...  It's a "Charger"...

    Offline KurtfromLaQuinta

    • Mopar Nut
    • ******
    • Posts: 6170
    • Gender: Male
    • My lugnuts take more torque than Honda's put out.
    Re: My Daytona clone project...
    « Reply #65 on: October 11, 2020, 07:50:34 pm »
    Not sure about your choice in wheel/tires. ;D

    Bucky
    I'm starting a new trend... Wood Year!
    A pretty ingenious way to transport and move around really.
    500 c.i.- Scat Crank, Scat Rods, Indy Aluminum heads, Comp XR280HR Cam, Six-Pack, Milodon 8 qt. Pan, 727  (reverse-manual, low band apply, 5 clutch disc, 3 qt. xtra. pan), N.P. 205, Ford 9" rear axle (4:11, 31 spline axles, Detroit Locker, converted/ disc brakes). Dana 44 front (converted/ disc, 4:10, Tru-Trac limited slip). Hydra Boost Brake Booster, Gear Vendors OD. 600+ ft. lbs. of torque

    Offline KurtfromLaQuinta

    • Mopar Nut
    • ******
    • Posts: 6170
    • Gender: Male
    • My lugnuts take more torque than Honda's put out.
    Re: My Daytona clone project...
    « Reply #66 on: October 31, 2020, 08:58:00 pm »
    So, the deal is... Barrett continues to work on the heavy metal of my clone. While I get his '41 Power Wagon ready for the road.
    Today he worked on mating the chassis to the body. Cutting out the old torsion bar mounts from the cross member. He then started to fill those old holes up so he can do the cut where the chassis will go into.

    500 c.i.- Scat Crank, Scat Rods, Indy Aluminum heads, Comp XR280HR Cam, Six-Pack, Milodon 8 qt. Pan, 727  (reverse-manual, low band apply, 5 clutch disc, 3 qt. xtra. pan), N.P. 205, Ford 9" rear axle (4:11, 31 spline axles, Detroit Locker, converted/ disc brakes). Dana 44 front (converted/ disc, 4:10, Tru-Trac limited slip). Hydra Boost Brake Booster, Gear Vendors OD. 600+ ft. lbs. of torque

    Offline mopar65pa

    • DODGE TRUCK PARTS COLLECTOR
    • Ultimate RCC Member
    • *********
    • Posts: 52597
    • Gender: Male
    • I NEVER CLAIMED TO BE ANYTHING BUT KNUTTS!
    Re: My Daytona clone project...
    « Reply #67 on: November 1, 2020, 09:04:45 am »
     {cool}
    I'd rather push a DODGE than drive a chevy or a ford!!!!!!
    77 400/727 RC
    79 360/727 RC
    80 318/435 TD
    93 CTD W250 club cab
    73 Charger SE 400/727 
    02 883R HD
    01 Elecrta HD
    88 W250 5 speed plow truck
    2000 CTD 5 speed ext cab short bed Wife's truck
    2002 Durango work beater
    2000 Durango blown head gaskets
    Quote
    Ted Nugent called and he wants your shirt back! http://www.youtube.com/watch?v=HFduVeNE

    Offline KurtfromLaQuinta

    • Mopar Nut
    • ******
    • Posts: 6170
    • Gender: Male
    • My lugnuts take more torque than Honda's put out.
    Re: My Daytona clone project...
    « Reply #68 on: November 5, 2020, 10:43:13 pm »
    Barrett is working to get the new chassis mounted to the existing uni- body.
    The original torsion bar/ transmission cross member was pretty rough and rusty on the driver's side. So he's been rebuilding it. Here's the before...



    And after...

    500 c.i.- Scat Crank, Scat Rods, Indy Aluminum heads, Comp XR280HR Cam, Six-Pack, Milodon 8 qt. Pan, 727  (reverse-manual, low band apply, 5 clutch disc, 3 qt. xtra. pan), N.P. 205, Ford 9" rear axle (4:11, 31 spline axles, Detroit Locker, converted/ disc brakes). Dana 44 front (converted/ disc, 4:10, Tru-Trac limited slip). Hydra Boost Brake Booster, Gear Vendors OD. 600+ ft. lbs. of torque

    Offline KurtfromLaQuinta

    • Mopar Nut
    • ******
    • Posts: 6170
    • Gender: Male
    • My lugnuts take more torque than Honda's put out.
    Re: My Daytona clone project...
    « Reply #69 on: November 15, 2020, 11:04:31 pm »
    More work on the Daytona.
    Moving the body up and down many times fitting the new chassis...



    Clearancing odds and ends that are in the way...



    I need to get under the car and do some cleaning and painting quickly.
    500 c.i.- Scat Crank, Scat Rods, Indy Aluminum heads, Comp XR280HR Cam, Six-Pack, Milodon 8 qt. Pan, 727  (reverse-manual, low band apply, 5 clutch disc, 3 qt. xtra. pan), N.P. 205, Ford 9" rear axle (4:11, 31 spline axles, Detroit Locker, converted/ disc brakes). Dana 44 front (converted/ disc, 4:10, Tru-Trac limited slip). Hydra Boost Brake Booster, Gear Vendors OD. 600+ ft. lbs. of torque

    Offline mopar65pa

    • DODGE TRUCK PARTS COLLECTOR
    • Ultimate RCC Member
    • *********
    • Posts: 52597
    • Gender: Male
    • I NEVER CLAIMED TO BE ANYTHING BUT KNUTTS!
    Re: My Daytona clone project...
    « Reply #70 on: November 16, 2020, 09:25:37 am »
    Man I wish I had that much room in my garage.  :o
    I'd rather push a DODGE than drive a chevy or a ford!!!!!!
    77 400/727 RC
    79 360/727 RC
    80 318/435 TD
    93 CTD W250 club cab
    73 Charger SE 400/727 
    02 883R HD
    01 Elecrta HD
    88 W250 5 speed plow truck
    2000 CTD 5 speed ext cab short bed Wife's truck
    2002 Durango work beater
    2000 Durango blown head gaskets
    Quote
    Ted Nugent called and he wants your shirt back! http://www.youtube.com/watch?v=HFduVeNE

    Offline Mad Max

    • certified 'Imagineer' - "...there is no box..."
    • RCC Nut
    • *******
    • Posts: 13181
    • Gender: Male
    • USAF Retired
    Re: My Daytona clone project...
    « Reply #71 on: November 16, 2020, 09:45:10 am »
    yah me too - my "shop" is actually just a 15/40 RV bay, and the #1 thing I wish I had more of was 'side-to-side room, but it exists and it's heated so I can't complain...  :P
    2002 Dakota Quad Cab 4x4 - 440/46rh/Atlas4/D60/14b/40s
    2007 Cummins Ram 3500 Megadually 4x4 "Big Mack" - 5.9/G56 6-speed
    2016 Durango Citadel AWD - 5.7 Hemi/8-spd auto
    1952 Willys M-38 "Poncho"

                    .there's always a way...

                           ...Molon Labe...

    Offline Elwenil

    • Mopar Parts Manager
    • Global Moderator
    • RCC Addict
    • *****
    • Posts: 30051
    • Gender: Male
    • Better to be a Wolf of Odin than a lamb of god.
    Re: My Daytona clone project...
    « Reply #72 on: November 16, 2020, 11:52:48 am »
    Man I wish I had that much room in my garage.  :o

    I wish I had a garage.   :-\
    L.Clemons

    1988 Ramcharger AW450-318EFI-NP435 4 speed-NP205 Transfer Case-Dana 60s-Braden Wormdrive Front Winch

    2018 Ram 2500HD Crew Cab 4WD 5.7L

    I am the unknown Will,
    The Anger that threatens glory and ruin:
    Lord of Storms am I,
    in heaven high and caverns deep.
    I am the Father of the War,
    Odin for you, Wotan for him,
    Wayfarer, Wanderer, beggar, king,
    numen, genius, strength and ring.

    Offline mopar65pa

    • DODGE TRUCK PARTS COLLECTOR
    • Ultimate RCC Member
    • *********
    • Posts: 52597
    • Gender: Male
    • I NEVER CLAIMED TO BE ANYTHING BUT KNUTTS!
    Re: My Daytona clone project...
    « Reply #73 on: November 16, 2020, 04:10:24 pm »
    yah me too - my "shop" is actually just a 15/40 RV bay, and the #1 thing I wish I had more of was 'side-to-side room, but it exists and it's heated so I can't complain...  :P
    I wish I had a garage.   :-\

    I'll be building my 28' x 35.5' 2 story garage this coming spring. Business write off.  ;D
    I'd rather push a DODGE than drive a chevy or a ford!!!!!!
    77 400/727 RC
    79 360/727 RC
    80 318/435 TD
    93 CTD W250 club cab
    73 Charger SE 400/727 
    02 883R HD
    01 Elecrta HD
    88 W250 5 speed plow truck
    2000 CTD 5 speed ext cab short bed Wife's truck
    2002 Durango work beater
    2000 Durango blown head gaskets
    Quote
    Ted Nugent called and he wants your shirt back! http://www.youtube.com/watch?v=HFduVeNE

    Offline 712edf

    • Full Member
    • ****
    • Posts: 1507
    • Gender: Male
    Re: My Daytona clone project...
    « Reply #74 on: November 16, 2020, 06:23:28 pm »
    My garage is 40' wide & 30' deep with a shitter in the corner. No heat no A/C.

    But garage isn't tall enough to get my W600 inside. :(

    Nice work Kurt.

    Bucky
    1975 W600   318  NP540  T223Rockwell tcase, Rockwell front & rear axles, 6.8 ratio

    Offline KurtfromLaQuinta

    • Mopar Nut
    • ******
    • Posts: 6170
    • Gender: Male
    • My lugnuts take more torque than Honda's put out.
    Re: My Daytona clone project...
    « Reply #75 on: November 17, 2020, 03:24:16 pm »
    Barrett complains he doesn't have enough room and wants my car out!  ;D
    You never have enough.
    The funny thing is... my wife and I financed that garage for him initially. He paid us back pretty quickly though.
    500 c.i.- Scat Crank, Scat Rods, Indy Aluminum heads, Comp XR280HR Cam, Six-Pack, Milodon 8 qt. Pan, 727  (reverse-manual, low band apply, 5 clutch disc, 3 qt. xtra. pan), N.P. 205, Ford 9" rear axle (4:11, 31 spline axles, Detroit Locker, converted/ disc brakes). Dana 44 front (converted/ disc, 4:10, Tru-Trac limited slip). Hydra Boost Brake Booster, Gear Vendors OD. 600+ ft. lbs. of torque

    Offline Mad Max

    • certified 'Imagineer' - "...there is no box..."
    • RCC Nut
    • *******
    • Posts: 13181
    • Gender: Male
    • USAF Retired
    Re: My Daytona clone project...
    « Reply #76 on: November 17, 2020, 03:32:15 pm »
    yup...soon as the Dakota is 'done' the shop turns into the Dakota's parking space...'cause I intend to drive the holy shit out of that bastid  8)
    2002 Dakota Quad Cab 4x4 - 440/46rh/Atlas4/D60/14b/40s
    2007 Cummins Ram 3500 Megadually 4x4 "Big Mack" - 5.9/G56 6-speed
    2016 Durango Citadel AWD - 5.7 Hemi/8-spd auto
    1952 Willys M-38 "Poncho"

                    .there's always a way...

                           ...Molon Labe...

    Offline KurtfromLaQuinta

    • Mopar Nut
    • ******
    • Posts: 6170
    • Gender: Male
    • My lugnuts take more torque than Honda's put out.
    Re: My Daytona clone project...
    « Reply #77 on: November 17, 2020, 03:35:32 pm »
    yup...soon as the Dakota is 'done' the shop turns into the Dakota's parking space...'cause I intend to drive the holy shit out of that bastid  8)
    For at least a year...  ;D
    500 c.i.- Scat Crank, Scat Rods, Indy Aluminum heads, Comp XR280HR Cam, Six-Pack, Milodon 8 qt. Pan, 727  (reverse-manual, low band apply, 5 clutch disc, 3 qt. xtra. pan), N.P. 205, Ford 9" rear axle (4:11, 31 spline axles, Detroit Locker, converted/ disc brakes). Dana 44 front (converted/ disc, 4:10, Tru-Trac limited slip). Hydra Boost Brake Booster, Gear Vendors OD. 600+ ft. lbs. of torque

    Offline Mad Max

    • certified 'Imagineer' - "...there is no box..."
    • RCC Nut
    • *******
    • Posts: 13181
    • Gender: Male
    • USAF Retired
    Re: My Daytona clone project...
    « Reply #78 on: November 17, 2020, 03:55:18 pm »
    ...geeze I sure hope so... :P ;D  -  I know it'll be a beast off-road, and if it drives as good on the road as it does on paper I'll be driving it everywhere - it'll be my commuter - might as well use the thing - that's why I put so much emphasis on the street manners {cool}
    2002 Dakota Quad Cab 4x4 - 440/46rh/Atlas4/D60/14b/40s
    2007 Cummins Ram 3500 Megadually 4x4 "Big Mack" - 5.9/G56 6-speed
    2016 Durango Citadel AWD - 5.7 Hemi/8-spd auto
    1952 Willys M-38 "Poncho"

                    .there's always a way...

                           ...Molon Labe...

    Offline KurtfromLaQuinta

    • Mopar Nut
    • ******
    • Posts: 6170
    • Gender: Male
    • My lugnuts take more torque than Honda's put out.
    Re: My Daytona clone project...
    « Reply #79 on: November 17, 2020, 05:09:04 pm »
    ...geeze I sure hope so... :P ;D  -  I know it'll be a beast off-road, and if it drives as good on the road as it does on paper I'll be driving it everywhere - it'll be my commuter - might as well use the thing - that's why I put so much emphasis on the street manners {cool}
    I'm all for a multi purpose vehicle.
    You should see the wife's Durango when my truck breaks down.  ;D
    500 c.i.- Scat Crank, Scat Rods, Indy Aluminum heads, Comp XR280HR Cam, Six-Pack, Milodon 8 qt. Pan, 727  (reverse-manual, low band apply, 5 clutch disc, 3 qt. xtra. pan), N.P. 205, Ford 9" rear axle (4:11, 31 spline axles, Detroit Locker, converted/ disc brakes). Dana 44 front (converted/ disc, 4:10, Tru-Trac limited slip). Hydra Boost Brake Booster, Gear Vendors OD. 600+ ft. lbs. of torque

    Offline jungle

    • Vendor
    • RCC Nut
    • *
    • Posts: 11192
    • Gender: Male
    • RCC Rules!#1 site on the net. I was born to Build
    Re: My Daytona clone project...
    « Reply #80 on: November 19, 2020, 04:21:13 am »
    Do I hear the word;

    Hellephant


     ;)
    Jim
    1988 RC.the gold one   pics
    1988 RC.440,4" lift,727 
    BIG BLOCKS RULE !!!!!!!
    440 pics

    Offline Mad Max

    • certified 'Imagineer' - "...there is no box..."
    • RCC Nut
    • *******
    • Posts: 13181
    • Gender: Male
    • USAF Retired
    Re: My Daytona clone project...
    « Reply #81 on: November 19, 2020, 09:21:03 am »

    I'm all for a multi purpose vehicle.


    ...that was the key for us getting the Durango - it is literally the perfect blend of a minivan (holds a lot of kidds n stuff), an AWD Subaru (all-weather capable), and Challenger R/T (Hemi baby) - it's a multi-useful all-season muscle-SUV...with a movie theater {cool}.
    2002 Dakota Quad Cab 4x4 - 440/46rh/Atlas4/D60/14b/40s
    2007 Cummins Ram 3500 Megadually 4x4 "Big Mack" - 5.9/G56 6-speed
    2016 Durango Citadel AWD - 5.7 Hemi/8-spd auto
    1952 Willys M-38 "Poncho"

                    .there's always a way...

                           ...Molon Labe...

    Offline KurtfromLaQuinta

    • Mopar Nut
    • ******
    • Posts: 6170
    • Gender: Male
    • My lugnuts take more torque than Honda's put out.
    Re: My Daytona clone project...
    « Reply #82 on: November 20, 2020, 03:14:55 pm »
    Do I hear the word;

    Hellephant


     ;)
    Jim
    Yeah. I dunno.
    I still like the big ol' nasty Big Block with all the mains cross bolted.
    Those small block Hemi's start to become grenades after 1100 H.P.
    With the Whipple supercharger... I should be able to accomplish the same, and more with the Big Block strength.
    500 c.i.- Scat Crank, Scat Rods, Indy Aluminum heads, Comp XR280HR Cam, Six-Pack, Milodon 8 qt. Pan, 727  (reverse-manual, low band apply, 5 clutch disc, 3 qt. xtra. pan), N.P. 205, Ford 9" rear axle (4:11, 31 spline axles, Detroit Locker, converted/ disc brakes). Dana 44 front (converted/ disc, 4:10, Tru-Trac limited slip). Hydra Boost Brake Booster, Gear Vendors OD. 600+ ft. lbs. of torque

    Offline jungle

    • Vendor
    • RCC Nut
    • *
    • Posts: 11192
    • Gender: Male
    • RCC Rules!#1 site on the net. I was born to Build
    Re: My Daytona clone project...
    « Reply #83 on: November 20, 2020, 03:55:56 pm »
    I like the RB's also. I wish I could find a 426 that I could afford.
    Jim
    1988 RC.the gold one   pics
    1988 RC.440,4" lift,727 
    BIG BLOCKS RULE !!!!!!!
    440 pics

    Offline KurtfromLaQuinta

    • Mopar Nut
    • ******
    • Posts: 6170
    • Gender: Male
    • My lugnuts take more torque than Honda's put out.
    Re: My Daytona clone project...
    « Reply #84 on: November 20, 2020, 10:59:24 pm »
    I like the RB's also. I wish I could find a 426 that I could afford.
    Jim
    I'm lucky to be able to pull this off... so far.   ;)
    I'm looking towards Indy Cylinder and Bill Mitchell for an aluminum block. 
    500 c.i.- Scat Crank, Scat Rods, Indy Aluminum heads, Comp XR280HR Cam, Six-Pack, Milodon 8 qt. Pan, 727  (reverse-manual, low band apply, 5 clutch disc, 3 qt. xtra. pan), N.P. 205, Ford 9" rear axle (4:11, 31 spline axles, Detroit Locker, converted/ disc brakes). Dana 44 front (converted/ disc, 4:10, Tru-Trac limited slip). Hydra Boost Brake Booster, Gear Vendors OD. 600+ ft. lbs. of torque

    Offline jungle

    • Vendor
    • RCC Nut
    • *
    • Posts: 11192
    • Gender: Male
    • RCC Rules!#1 site on the net. I was born to Build
    Re: My Daytona clone project...
    « Reply #85 on: November 21, 2020, 06:21:20 am »
    Indy has some SWEET aluminum blocks & that would save a lot of weight.
    Jim
    1988 RC.the gold one   pics
    1988 RC.440,4" lift,727 
    BIG BLOCKS RULE !!!!!!!
    440 pics

    Offline KurtfromLaQuinta

    • Mopar Nut
    • ******
    • Posts: 6170
    • Gender: Male
    • My lugnuts take more torque than Honda's put out.
    Re: My Daytona clone project...
    « Reply #86 on: November 21, 2020, 07:50:17 pm »
    Indy has some SWEET aluminum blocks & that would save a lot of weight.
    Jim
    They recently updated them for more strength.
    Yes. Going after the weight savings.
    With a set of aluminum Hemi heads and an aluminum block... it'll weigh the same as as a small block.
    500 c.i.- Scat Crank, Scat Rods, Indy Aluminum heads, Comp XR280HR Cam, Six-Pack, Milodon 8 qt. Pan, 727  (reverse-manual, low band apply, 5 clutch disc, 3 qt. xtra. pan), N.P. 205, Ford 9" rear axle (4:11, 31 spline axles, Detroit Locker, converted/ disc brakes). Dana 44 front (converted/ disc, 4:10, Tru-Trac limited slip). Hydra Boost Brake Booster, Gear Vendors OD. 600+ ft. lbs. of torque