Author Topic: 52" front spring hanger with winch mount  (Read 29077 times)

0 Members and 1 Guest are viewing this topic.

Offline jungle

  • Moderator
  • RCC Nut
  • *****
  • Posts: 11167
  • Gender: Male
  • RCC Rules!#1 site on the net. I was born to Build
Re: 52" front spring hanger with winch mount
« Reply #50 on: December 24, 2014, 01:44:33 pm »
Guys I finally have all the costs in as of today.
The center section with the;
2)1 1/2" poly bushings & 5/8" grease bolt kits,
14)1/2"-20 grade 8 bolts & all metal lock nuts
28) 1/2" grade 8 SAE washers.
4) "L" shackles
4) straight shackles
Your cost for the center section kit is $585.22


The 2 short wings (1 left & 1 right) for the bumper
8) 1/2"-20 grade 8 bolts & all metal lock nuts
16) 1/2" grade 8 SAE washers.
Your cost for the wings kit is $239.45

The 2 Tall wings (1 left & 1 right) for the bumper
 1/2"-20 grade 8 bolts & all metal lock nuts
16) 1/2" grade 8 SAE washers
Your cost for the wings kit is $259.84

The 2 Tall wings with Light pocket/mounts (1 left & 1 right) for the bumper
 1/2"-20 grade 8 bolts & all metal lock nuts
16) 1/2" grade 8 SAE washers
Your cost for the wings kit is $298.36

Winch section fill in plate kit @$36.45

I try to keep a short one & tall one in stock

I also have one for the Chevy D60 that has the narrower spring hangers

This center section & wings are around 139 Lbs so I will need to ship in 2 boxes so UPS can ship it.
Thanks for looking!
Jim
« Last Edit: August 19, 2017, 08:24:31 am by jungle »
1988 RC.the gold one   pics
1988 RC.440,4" lift,727 
BIG BLOCKS RULE !!!!!!!
440 pics

RamChargerCentral

  • Advertisement
  • ***

    Offline 4wdAdventures

    • Newbie
    • *
    • Posts: 9
    • RCC Rules!
    Re: 52" front spring hanger with winch mount
    « Reply #51 on: December 24, 2014, 02:39:55 pm »
    On the shackles you are referring to, are those the shackles for the rear of the front spring, or do you mean recovery shackle points?  ???

    Offline 70stroker

    • Newbie
    • *
    • Posts: 42
    • RCC Rules!
    Re: 52" front spring hanger with winch mount
    « Reply #52 on: December 24, 2014, 03:28:29 pm »
    On the shackles you are referring to, are those the shackles for the rear of the front spring, or do you mean recovery shackle points?  ???



    He is talking about the rear of the front spring,  you run different shackles for different lengtn springs.


    Pm sent jungles,  glad you got it done.  Looks awesome

    Offline jungle

    • Moderator
    • RCC Nut
    • *****
    • Posts: 11167
    • Gender: Male
    • RCC Rules!#1 site on the net. I was born to Build
    Re: 52" front spring hanger with winch mount
    « Reply #53 on: December 27, 2014, 05:10:04 am »


    He is talking about the rear of the front spring,  you run different shackles for different length springs.


    Pm sent jungles,  glad you got it done.  Looks awesome


    Exactly what 70stroker said.

    PM returned

    Jim


    1988 RC.the gold one   pics
    1988 RC.440,4" lift,727 
    BIG BLOCKS RULE !!!!!!!
    440 pics

    Offline cragdweller

    • Full Member
    • ****
    • Posts: 1296
    • Gender: Male
    Re: 52" front spring hanger with winch mount
    « Reply #54 on: December 27, 2014, 03:14:08 pm »
    Guys I finally have all the costs in as of today.
    The center section with the;
    2)1 1/2" poly bushings & 5/8" grease bolt kits,
    14)1/2"-20 grade 8 bolts & all metal lock nuts
    28) 1/2" grade 8 SAE washers.
    4) "L" shackles
    4) straight shackles
    Your cost for the center section kit is $585.22


    The 2 wings (1 left & 1 right) for the bumper
    8) 1/2"-20 grade 8 bolts & all metal lock nuts
    16) 1/2" grade 8 SAE washers.

    Your cost for the wings kit is $239.45

    I'll need some kind of nonrefundable deposit it get these into production. If you are going to order PM me & we can setup the deposit & order.
    This center section & wings are around 100 Lbs so I will need to ship in 2 boxes so UPS can ship it.
    Thanks for looking!
    Jim

    Hey Jim,  So for the center section parts list, the 2 bushings and grease bolts are for the front of the front springs?  I don't think I need these parts since they came with the front shackle hanger kits that I got from you.  What would the cost be for just the winch mount/front spring hanger center section?

    Thanks,
    Craig
    1975 Plymouth Trail Duster Sport.  440/727, 203/205 doubler, Dana 60 front and 70 rear.  Still under construction...

    1977 Dodge Power Wagon W200 Crew Cab.  Next project.

    2002 2500 Quad Cab Short Bed 4x4.  Cummins HO w/ NV5600 six speed.

    Offline dodgeboyz

    • RCC Rookie
    • **
    • Posts: 368
      • Dodge boys have more fun
    Re: 52" front spring hanger with winch mount
    « Reply #55 on: December 28, 2014, 01:39:37 am »
    did I read somewere this kit is ava. with or is a 3.5 " drop [lift]
    Sorry if its a dumb question  :-[
    my country is going to pot but I got my 70s music a hell of a lot of ammo and a good imagination

    Offline jungle

    • Moderator
    • RCC Nut
    • *****
    • Posts: 11167
    • Gender: Male
    • RCC Rules!#1 site on the net. I was born to Build
    Re: 52" front spring hanger with winch mount
    « Reply #56 on: December 28, 2014, 06:24:22 am »
    did I read somewhere this kit is ava. with or is a 3.5 " drop [lift]
    Sorry if its a dumb question  :-[



    The other 52" spring hanger kit is available in a 2" drop over the OEM Dodge spring hanger. This one is also going to have that Option.


    Here is a link to the hangers on my gold RC;
    https://ramchargercentral.com/rcs-tds-durangos-etc/jungles-gold-88-rc-pdi-manifold-is-on-the-ctd!!!!/700/

    Jim
    1988 RC.the gold one   pics
    1988 RC.440,4" lift,727 
    BIG BLOCKS RULE !!!!!!!
    440 pics

    Offline dodgeboyz

    • RCC Rookie
    • **
    • Posts: 368
      • Dodge boys have more fun
    Re: 52" front spring hanger with winch mount
    « Reply #57 on: December 28, 2014, 07:56:53 pm »

    The other 52" spring hanger kit is available in a 2" drop over the OEM Dodge spring hanger. This one is also going to have that Option.


    Here is a link to the hangers on my gold RC;
    https://ramchargercentral.com/rcs-tds-durangos-etc/jungles-gold-88-rc-pdi-manifold-is-on-the-ctd!!!!/700/

    Jim
    ok so if we wanted a total 10.5" of lift and already have 3" body and now use your 2" drop hanger kit for the 52s what lift springs would you use to get us there, trying to run 42 inch tires on 10.5" lift and don't mind trimming or cutting fenders to keep a lower center of gravity
    my country is going to pot but I got my 70s music a hell of a lot of ammo and a good imagination

    Offline lstzephyr

    • Newbie
    • *
    • Posts: 7
    Re: 52" front spring hanger with winch mount
    « Reply #58 on: December 31, 2014, 03:35:54 am »
    Can you get measurements of your truck's height at the fender lip?  Also can you get a fender lip to hub center measurement and a tire height measurement too? I'm very interested in this but I have to be able to fit in a parking garage at work so overall height is important. Thanks!
    « Last Edit: December 31, 2014, 03:37:34 am by lstzephyr »

    Offline jungle

    • Moderator
    • RCC Nut
    • *****
    • Posts: 11167
    • Gender: Male
    • RCC Rules!#1 site on the net. I was born to Build
    Re: 52" front spring hanger with winch mount
    « Reply #59 on: December 31, 2014, 04:00:30 am »
    Can you get measurements of your truck's height at the fender lip?  Also can you get a fender lip to hub center measurement and a tire height measurement too? I'm very interested in this but I have to be able to fit in a parking garage at work so overall height is important. Thanks!

    What size tires are you thinking about running? Do you have the D60 or D44 front?
    Jim
    1988 RC.the gold one   pics
    1988 RC.440,4" lift,727 
    BIG BLOCKS RULE !!!!!!!
    440 pics

    Offline jungle

    • Moderator
    • RCC Nut
    • *****
    • Posts: 11167
    • Gender: Male
    • RCC Rules!#1 site on the net. I was born to Build
    Re: 52" front spring hanger with winch mount
    « Reply #60 on: December 31, 2014, 03:04:27 pm »
    Can you get measurements of your truck's height at the fender lip?  Also can you get a fender lip to hub center measurement and a tire height measurement too? I'm very interested in this but I have to be able to fit in a parking garage at work so overall height is important. Thanks!


    On my gold RC from the fender lip to the center of my D60 hub is 28 1/2"
    That is with the short hanger & a 2" lift 52" spring.
    Jim
    1988 RC.the gold one   pics
    1988 RC.440,4" lift,727 
    BIG BLOCKS RULE !!!!!!!
    440 pics

    Offline lstzephyr

    • Newbie
    • *
    • Posts: 7
    Re: 52" front spring hanger with winch mount
    « Reply #61 on: December 31, 2014, 07:53:59 pm »
    My truck is a 91 cummins w250 so it has a 60.  It currently has 235/85/16 but I would like to go to 315/75/16.

    Thank you for the measurements.  I've got a bunch of research to do. 

    Offline jungle

    • Moderator
    • RCC Nut
    • *****
    • Posts: 11167
    • Gender: Male
    • RCC Rules!#1 site on the net. I was born to Build
    Re: 52" front spring hanger with winch mount
    « Reply #62 on: January 1, 2015, 05:57:19 am »
    My truck is a 91 cummins w250 so it has a 60.  It currently has 235/85/16 but I would like to go to 315/75/16.

    Thank you for the measurements.  I've got a bunch of research to do.

    How tall in inches are the 315/75/16?
    Jim
    1988 RC.the gold one   pics
    1988 RC.440,4" lift,727 
    BIG BLOCKS RULE !!!!!!!
    440 pics

    Offline lstzephyr

    • Newbie
    • *
    • Posts: 7
    Re: 52" front spring hanger with winch mount
    « Reply #63 on: January 5, 2015, 11:39:06 pm »
    34" I believe.  I need to be under 7' 8".

    Offline chau8238

    • Full Member
    • ****
    • Posts: 1952
    • Gender: Male
    • 85 Ramcharger Prospector
    Re: 52" front spring hanger with winch mount
    « Reply #64 on: January 7, 2015, 02:19:33 pm »
    How strong are the recovery points on the front of the bumper?   I know it'd be fine for straight pulls, but what about at an angle?
    85 RamCharger Prospector, 440 big block, 727, NP208  Sitting on 35's  TOY. 
    85 RamCharger Project 92 I/C Cummins, A518, 60/70, 4" lift kit, 36" tires
    82 W250, 360, NP435, 44/60 on 37's.  (383 planned)
    11 Silverado, my Daily Driver

    Offline 4wdAdventures

    • Newbie
    • *
    • Posts: 9
    • RCC Rules!
    Re: 52" front spring hanger with winch mount
    « Reply #65 on: January 14, 2015, 05:31:06 pm »
    Just waiting on my tax refund...

    Offline jungle

    • Moderator
    • RCC Nut
    • *****
    • Posts: 11167
    • Gender: Male
    • RCC Rules!#1 site on the net. I was born to Build
    Re: 52" front spring hanger with winch mount
    « Reply #66 on: January 17, 2015, 12:44:06 pm »
    How strong are the recovery points on the front of the bumper?   I know it'd be fine for straight pulls, but what about at an angle?


    If you felt it needed to be a little stronger for side pulls you could add a couple gussets to the pull points.
    Jim
    1988 RC.the gold one   pics
    1988 RC.440,4" lift,727 
    BIG BLOCKS RULE !!!!!!!
    440 pics

    Offline jungle

    • Moderator
    • RCC Nut
    • *****
    • Posts: 11167
    • Gender: Male
    • RCC Rules!#1 site on the net. I was born to Build
    Re: 52" front spring hanger with winch mount
    « Reply #67 on: January 17, 2015, 12:47:28 pm »
    Just waiting on my tax refund...

    Right now figure a good 2 week lead time from order to ship. But by spring I'm going to try to stock one short winch hanger & one taller winch hanger.
    Jim
    1988 RC.the gold one   pics
    1988 RC.440,4" lift,727 
    BIG BLOCKS RULE !!!!!!!
    440 pics

    Offline 70stroker

    • Newbie
    • *
    • Posts: 42
    • RCC Rules!
    Re: 52" front spring hanger with winch mount
    « Reply #68 on: January 22, 2015, 06:51:07 pm »
    Got mine today jim, thanks alot for taking this project on when i came to you with it.  It looks fantastic,  hopefully in the next week or two ill have some installed photos for you.

    Offline jungle

    • Moderator
    • RCC Nut
    • *****
    • Posts: 11167
    • Gender: Male
    • RCC Rules!#1 site on the net. I was born to Build
    Re: 52" front spring hanger with winch mount
    « Reply #69 on: January 23, 2015, 02:42:52 pm »
    Got mine today jim, thanks alot for taking this project on when i came to you with it.  It looks fantastic,  hopefully in the next week or two ill have some installed photos for you.


    How did the box arrive? I'm curious on how the box & packing worked out with a 100Lb part?
    Just post your pics when you have them.
    Thanks!!
    Jim
    1988 RC.the gold one   pics
    1988 RC.440,4" lift,727 
    BIG BLOCKS RULE !!!!!!!
    440 pics

    Offline 70stroker

    • Newbie
    • *
    • Posts: 42
    • RCC Rules!
    Re: 52" front spring hanger with winch mount
    « Reply #70 on: January 24, 2015, 08:11:54 am »
    Box wasnt to bad,  all your little boxes inside did there job and supported the bumper.  The only part that was torn up was where the d ring mounts, one side was exposed, and you could tell it hit concrete a few times on its trip.

    Offline jungle

    • Moderator
    • RCC Nut
    • *****
    • Posts: 11167
    • Gender: Male
    • RCC Rules!#1 site on the net. I was born to Build
    Re: 52" front spring hanger with winch mount
    « Reply #71 on: January 24, 2015, 04:11:53 pm »
    Box wasnt to bad,  all your little boxes inside did there job and supported the bumper.  The only part that was torn up was where the d ring mounts, one side was exposed, and you could tell it hit concrete a few times on its trip.


    Thanks for the reply!!!! I'll add more cribbing on the future shipments.
    Thanks,
    Jim
    1988 RC.the gold one   pics
    1988 RC.440,4" lift,727 
    BIG BLOCKS RULE !!!!!!!
    440 pics

    Offline jungle

    • Moderator
    • RCC Nut
    • *****
    • Posts: 11167
    • Gender: Male
    • RCC Rules!#1 site on the net. I was born to Build
    Re: 52" front spring hanger with winch mount
    « Reply #72 on: June 27, 2015, 05:02:04 am »
    bump
    1988 RC.the gold one   pics
    1988 RC.440,4" lift,727 
    BIG BLOCKS RULE !!!!!!!
    440 pics

    Offline LUCIUS

    • Newbie
    • *
    • Posts: 18
    • RCC Rules!
    52" front spring hanger with winch mount
    « Reply #73 on: October 23, 2015, 11:23:27 am »
    I would love to see a few more pics of complete bumper installed on the trucks!!! Jim I already have your 4" drop hanger would it b possible to build the center section with just a flat plate that could bolt between the frame and the drop hanger I already have?

    Offline Bansheeman6100

    • Newbie
    • *
    • Posts: 12
    • Gender: Male
    • RCC Rules!
    Re: 52" front spring hanger with winch mount
    « Reply #74 on: February 12, 2016, 08:13:24 pm »
    Pm sent, definitely want one of these!
    1985 W350 SCLB, 12v, built trans, Warn hubs, 285/75 KO2s on 16x8 black wagon wheels, Jungle HD front bushing kit, 2.5: Skyjacker front Leafs, Borgeson Shaft

    Offline Bansheeman6100

    • Newbie
    • *
    • Posts: 12
    • Gender: Male
    • RCC Rules!
    Re: 52" front spring hanger with winch mount
    « Reply #75 on: February 13, 2016, 10:23:02 am »
    im not sure if there is a limitation for newbie's sending/receiving PM's, but im not sure if any of mine have made it through as my sent folder is empty.  you can also email me at [email protected], thanks
    1985 W350 SCLB, 12v, built trans, Warn hubs, 285/75 KO2s on 16x8 black wagon wheels, Jungle HD front bushing kit, 2.5: Skyjacker front Leafs, Borgeson Shaft

    Offline SuperBurban

    • Lives matter, if you need to put a skin color in the front of the phrase, YOU are racist.
    • Lifetime Supporter
    • Ultimate RCC Member
    • *
    • Posts: 58255
    • Gender: Male
    Re: 52" front spring hanger with winch mount
    « Reply #76 on: February 13, 2016, 09:59:31 pm »
    im not sure if there is a limitation for newbie's sending/receiving PM's, but im not sure if any of mine have made it through as my sent folder is empty. 
    FYI, unless you click the box for "save a copy in my sent box", they will not be saved.
    77 W200, 360/727/NP203/D44HD/D60 (Wifes Toy)
    77 M887- 318/727/NP203 D44HD/D60
    78/86 Ramcharger.  360/727/NP203 D44/9&1/4
    85/89/90 D150/W250 5.9TBI/435/241 D44HD/D60HD
    85 W350 360/727/241 D44HD/D60
    97 B3500 5.9MPFI/518 D60HD
    20 Pacifica Hybrid, 3.6 V6, EVT 1 speed trans.
    projects:
    85 Country Coach RV, 5.9 Cummins/TH475,GV od,US gear Exhaust brake,D70HD (4 wheel disk brakes, 10 lug 19.5 rims.

    Offline jungle

    • Moderator
    • RCC Nut
    • *****
    • Posts: 11167
    • Gender: Male
    • RCC Rules!#1 site on the net. I was born to Build
    Re: 52" front spring hanger with winch mount
    « Reply #77 on: February 15, 2016, 10:12:11 am »
    im not sure if there is a limitation for newbie's sending/receiving PM's, but im not sure if any of mine have made it through as my sent folder is empty.  you can also email me at [email protected], thanks

    Quote sent.
    Thanks,
    Jim
    1988 RC.the gold one   pics
    1988 RC.440,4" lift,727 
    BIG BLOCKS RULE !!!!!!!
    440 pics

    Offline Ryxz93

    • Newbie
    • *
    • Posts: 66
    • Gender: Male
    • Mopar or No Car
    Re: 52" front spring hanger with winch mount
    « Reply #78 on: July 6, 2016, 05:57:35 pm »
    Jungle I need 2 possibly 3 bumpers for a 79 and an 87 ramcharger.... i possibly will be bring a 4th home in a month or two so i would need a bumper that one also
    1986 Royale SE Ramcharger 318/727
    1987 LE Ramcharger 318/727
    1979 SE Ramcharger 440/727
    2001 Ram 1500 3.9l/NV3500
    1998 Jeep Cherokee   4.0/AW4
    1996 Jeep Cherokee   4.0l/AX15
    1996 Jeep Cherokee   4.0l/AW4

    Offline jungle

    • Moderator
    • RCC Nut
    • *****
    • Posts: 11167
    • Gender: Male
    • RCC Rules!#1 site on the net. I was born to Build
    Re: 52" front spring hanger with winch mount
    « Reply #79 on: July 7, 2016, 11:12:58 am »
    Jungle I need 2 possibly 3 bumpers for a 79 and an 87 ramcharger.... i possibly will be bring a 4th home in a month or two so i would need a bumper that one also
    Would you need the short one or the tall one?
    Jim
    1988 RC.the gold one   pics
    1988 RC.440,4" lift,727 
    BIG BLOCKS RULE !!!!!!!
    440 pics

    Offline Ryxz93

    • Newbie
    • *
    • Posts: 66
    • Gender: Male
    • Mopar or No Car
    Re: 52" front spring hanger with winch mount
    « Reply #80 on: July 7, 2016, 02:17:10 pm »
    the one you showed me in a pm that was on your good one with out the pipe work...
    1986 Royale SE Ramcharger 318/727
    1987 LE Ramcharger 318/727
    1979 SE Ramcharger 440/727
    2001 Ram 1500 3.9l/NV3500
    1998 Jeep Cherokee   4.0/AW4
    1996 Jeep Cherokee   4.0l/AX15
    1996 Jeep Cherokee   4.0l/AW4

    Offline jungle

    • Moderator
    • RCC Nut
    • *****
    • Posts: 11167
    • Gender: Male
    • RCC Rules!#1 site on the net. I was born to Build
    Re: 52" front spring hanger with winch mount
    « Reply #81 on: July 8, 2016, 03:56:48 am »
    the one you showed me in a pm that was on your good one with out the pipe work...
    That would be the short one.
    How mush lift are you going for?
    Are you going to use the 52" chevy or the dodge front spring?

    I have 2 short bumpers in stock gor use with the Dodge D60.
    I have one short bumper in stock that is to be used with the Chevy D60.
    Jim
    1988 RC.the gold one   pics
    1988 RC.440,4" lift,727 
    BIG BLOCKS RULE !!!!!!!
    440 pics

    Offline Ryxz93

    • Newbie
    • *
    • Posts: 66
    • Gender: Male
    • Mopar or No Car
    Re: 52" front spring hanger with winch mount
    « Reply #82 on: July 8, 2016, 09:26:57 am »
    i am wanting to use 4 inch dodge lift springs on my 87 and my 79 is lifted around 6-7 inches....
    1986 Royale SE Ramcharger 318/727
    1987 LE Ramcharger 318/727
    1979 SE Ramcharger 440/727
    2001 Ram 1500 3.9l/NV3500
    1998 Jeep Cherokee   4.0/AW4
    1996 Jeep Cherokee   4.0l/AX15
    1996 Jeep Cherokee   4.0l/AW4

    Offline jungle

    • Moderator
    • RCC Nut
    • *****
    • Posts: 11167
    • Gender: Male
    • RCC Rules!#1 site on the net. I was born to Build
    Re: 52" front spring hanger with winch mount
    « Reply #83 on: July 9, 2016, 03:56:42 am »
    Send me a PM with your town & Zip & I'll do the shipping Quote.

    It looks like you want 2 short winch bumpers setup for Dodge springs. With that you will need the HD frame bushing kit for the shackle end of the front spring. Do you have my HD frame bushing kit with the 5/8" grease bolts yet? If not I'll include it in the Quote.
    Jim

    When do you think you'll be ordering? Will you do one @ a time or both @ the same time. I just want to make sure I have everything ready.
    1988 RC.the gold one   pics
    1988 RC.440,4" lift,727 
    BIG BLOCKS RULE !!!!!!!
    440 pics

    Offline Ryxz93

    • Newbie
    • *
    • Posts: 66
    • Gender: Male
    • Mopar or No Car
    Re: 52" front spring hanger with winch mount
    « Reply #84 on: July 11, 2016, 09:43:32 am »
    pm sent
    1986 Royale SE Ramcharger 318/727
    1987 LE Ramcharger 318/727
    1979 SE Ramcharger 440/727
    2001 Ram 1500 3.9l/NV3500
    1998 Jeep Cherokee   4.0/AW4
    1996 Jeep Cherokee   4.0l/AX15
    1996 Jeep Cherokee   4.0l/AW4

    Offline jungle

    • Moderator
    • RCC Nut
    • *****
    • Posts: 11167
    • Gender: Male
    • RCC Rules!#1 site on the net. I was born to Build
    Re: 52" front spring hanger with winch mount
    « Reply #85 on: October 12, 2017, 03:35:22 am »
    bump
    1988 RC.the gold one   pics
    1988 RC.440,4" lift,727 
    BIG BLOCKS RULE !!!!!!!
    440 pics

    Offline Utmaggot

    • Newbie
    • *
    • Posts: 1
    • RCC Rules!
    Re: 52" front spring hanger with winch mount
    « Reply #86 on: June 14, 2018, 06:48:56 pm »
    Pm sent

    Offline Energyindoor

    • Newbie
    • *
    • Posts: 34
    Re: 52" front spring hanger with winch mount
    « Reply #87 on: August 29, 2018, 02:09:54 pm »
    I have your rear spring hangers. I finally got a front 60 and rear 70 so the project is really about underway. Could I get a price quote to ship to 93065? Just center section, I will be using the 52 springs. I pulled I believe springs off a Chevy that had a skyjacker 6 lift. Any way of figuring out if I need front lift springs to match or standard springs? Thanks!
    84 Ramcharger- 318, bent frame
    89 Ramcharger- 360 TBI, the replacement

    Offline jungle

    • Moderator
    • RCC Nut
    • *****
    • Posts: 11167
    • Gender: Male
    • RCC Rules!#1 site on the net. I was born to Build
    Re: 52" front spring hanger with winch mount
    « Reply #88 on: September 1, 2018, 10:21:18 am »
    I have your rear spring hangers. I finally got a front 60 and rear 70 so the project is really about underway. Could I get a price quote to ship to 93065? Just center section, I will be using the 52 springs. I pulled I believe springs off a Chevy that had a skyjacker 6 lift. Any way of figuring out if I need front lift springs to match or standard springs? Thanks!


    Sorry for the Delay!!!


    Do you have my HD frame bushing yet? If not you'll need one because all my shackles are drilled for the bigger 5/8" grease bolts.


    The 52" spring are rear spring out of a Chevy?  I have 2" lift springs in the front of my RC & that = 8" lift.
    Did the rear spring have Blocks?
    Jim
    1988 RC.the gold one   pics
    1988 RC.440,4" lift,727 
    BIG BLOCKS RULE !!!!!!!
    440 pics

    Offline Energyindoor

    • Newbie
    • *
    • Posts: 34
    Re: 52" front spring hanger with winch mount
    « Reply #89 on: September 4, 2018, 03:24:12 pm »
    Sorry about the late reply. I do not have any of the front hanger equipment. the rear springs did have a block but they are also the longer 64 inches vs the 56" I may just get the 56 to save on install time.

    Also sorry for the confusion, I do not yet have the 52's just the rear 64's
    84 Ramcharger- 318, bent frame
    89 Ramcharger- 360 TBI, the replacement

    Offline jungle

    • Moderator
    • RCC Nut
    • *****
    • Posts: 11167
    • Gender: Male
    • RCC Rules!#1 site on the net. I was born to Build
    Re: 52" front spring hanger with winch mount
    « Reply #90 on: September 5, 2018, 03:44:51 am »
    I'll get you the Quote today & send it in a PM.
    Jim
    1988 RC.the gold one   pics
    1988 RC.440,4" lift,727 
    BIG BLOCKS RULE !!!!!!!
    440 pics

    Offline BruiserM880

    • Jr. Member
    • ***
    • Posts: 512
    • Gender: Male
    • Working on the crew or just working.
    Re: 52" front spring hanger with winch mount
    « Reply #91 on: November 26, 2018, 01:33:58 pm »
    PM sent with a quote for a 2" drop on the spring hangers.

    Eric
    1985 W350 Crew Cab with 1992 Cummins drivetrain--under going frame off restoration.
    1975 W300 1992 Cummins-NV5600 6spd-Divorced NP205-Dually Dana 60-2003 Dodge AAM 11.5 rear Dually axle-Detroits F&R-35x10x17s-Farm Truck Build.

    Follow both builds on Instagram @ce_tx

    Offline ERICRC91

    • Newbie
    • *
    • Posts: 1
    • RCC Rules!
    Re: 52" front spring hanger with winch mount
    « Reply #92 on: October 16, 2020, 10:16:03 pm »
    Hey jungle are you still making bumpers? And one other question is it an option for the 2" drop or can it be ordered with out? Last question is can your shackles be use with the stock shackle mount until I can afford your upgrade mount?

    Offline jungle

    • Moderator
    • RCC Nut
    • *****
    • Posts: 11167
    • Gender: Male
    • RCC Rules!#1 site on the net. I was born to Build
    Re: 52" front spring hanger with winch mount
    « Reply #93 on: October 17, 2020, 12:27:40 pm »
    Hey jungle are you still making bumpers? And one other question is it an option for the 2" drop or can it be ordered with out? Last question is can your shackles be use with the stock shackle mount until I can afford your upgrade mount?

    Yes I still have stock.
    All the shackles are drilled for the 5/8" grease bolts.
    I have the bumper in the short version & the 2" drop hanger kit.
    The Dodge shackles & Chevy shackles are different lengths.
    Does that help?
    Jim

    1988 RC.the gold one   pics
    1988 RC.440,4" lift,727 
    BIG BLOCKS RULE !!!!!!!
    440 pics