Author Topic: CB Radios and Equipment  (Read 73151 times)

0 Members and 1 Guest are viewing this topic.

Offline Toyradio

  • Chapter Redneck - Instigator
  • Vendor
  • RCC Nut
  • *
  • Posts: 11645
  • Gender: Male
  • Follow me if you can. Now, don't get skeered
CB Radios and Equipment
« on: April 9, 2006, 12:30:47 PM »
I offer a full service shop, sales service and repairs on all makes and models of CB Radios. I have a complete mail order service as well. I have two full time techs on duty 5 days a week.If it's on the market I can get it. I will give a 10% discount to any RCC members on new radios and equipment bought. I offer a 90 day warranty on all used equipment sold. I can meet or beat anyones prices.
1991 Ramcharger 4x4 Stock for now
88 Suzuki Samurai Lifted
84 Chevy 1/2 ton 408 Stroker lifted, 60's/14 bolt 39.5 locked
82 Chevy 350/700R / 208 TC, Dana 44HD/14 Bolt, 44" Ground Hawgs
1990 Dodge 1500 Project/daily driver to be
82 Chevy Parts truck 350 w/turbo 350 /208
stock 4x4

RamChargerCentral

  • Advertisement
  • ***

    Offline phoenix827

    • Ct Chapter VP, RCC Chapter Slut
    • RCC Nut
    • *******
    • Posts: 10940
    • Gender: Male
    • This is my BOOM stick!!
    Re: CB Radios and Equipment
    « Reply #1 on: April 9, 2006, 05:57:15 PM »
    Skip, do you have any sort of inventory list? A website?
    What good does it do to protect the forests from tire prints if you are just going to replace them with septic tanks?

    Quote from ChrisKD,
    "Provided i don't get Mauled by a Unicorn or kicked in the nuts by some other fairytale creature, the truck should be running this weekend." :)

    Offline Toyradio

    • Chapter Redneck - Instigator
    • Vendor
    • RCC Nut
    • *
    • Posts: 11645
    • Gender: Male
    • Follow me if you can. Now, don't get skeered
    Re: CB Radios and Equipment
    « Reply #2 on: April 10, 2006, 05:45:08 PM »
    I have approximatly 37 radios a dozen diferent antennas, mounts mikes coax, noise toys, connex boards ect. What are you looking for? I have access to over a dozen different distributors as well. If I don't have it, I can get it.
    1991 Ramcharger 4x4 Stock for now
    88 Suzuki Samurai Lifted
    84 Chevy 1/2 ton 408 Stroker lifted, 60's/14 bolt 39.5 locked
    82 Chevy 350/700R / 208 TC, Dana 44HD/14 Bolt, 44" Ground Hawgs
    1990 Dodge 1500 Project/daily driver to be
    82 Chevy Parts truck 350 w/turbo 350 /208
    stock 4x4

    Offline PatrickH

    • Full Member
    • ****
    • Posts: 1318
    • Gender: Male
      • My Truck! Updated
    Re: CB Radios and Equipment
    « Reply #3 on: May 9, 2006, 07:08:35 PM »
    sent u a pm toyradio.
    -Patrick

    1985 Dodge Ramcharger 4x4
    318CID, TF727, NP208
    35" bfg muds 3 in body lift
    Edelbrock performer 1406 carb/intake. Lokar linkage
    Borgeson steering shaft, mopar distributor msd wires
    14 bolt, detroit locker. 410s disc brake caddy calipers1350 shaft
    dana 60 open.

    Offline Toyradio

    • Chapter Redneck - Instigator
    • Vendor
    • RCC Nut
    • *
    • Posts: 11645
    • Gender: Male
    • Follow me if you can. Now, don't get skeered
    Re: CB Radios and Equipment
    « Reply #4 on: May 11, 2006, 08:06:14 PM »
    Back at ya.
    1991 Ramcharger 4x4 Stock for now
    88 Suzuki Samurai Lifted
    84 Chevy 1/2 ton 408 Stroker lifted, 60's/14 bolt 39.5 locked
    82 Chevy 350/700R / 208 TC, Dana 44HD/14 Bolt, 44" Ground Hawgs
    1990 Dodge 1500 Project/daily driver to be
    82 Chevy Parts truck 350 w/turbo 350 /208
    stock 4x4

    Offline High-Tech Redneck

    • I may grow old, but I refuse to Grow Up!!
    • Lifetime Supporter
    • Full Member
    • *
    • Posts: 1503
    • Gender: Male
      • Facebook
    Re: CB Radios and Equipment
    « Reply #5 on: May 11, 2006, 09:20:03 PM »
    I offer a full service shop, sales service and repairs on all makes and models of CB Radios. I have a complete mail order service as well. I have two full time techs on duty 5 days a week.If it's on the market I can get it. I will give a 10% discount to any RCC members on new radios and equipment bought. I offer a 90 day warranty on all used equipment sold. I can meet or beat anyones prices.
    Can u get a hold of Galaxies. Used to have a Galaxy 88,but it was stolen by another CB shop. Would like to replace it eventually.
    '86 Dodge Ramcharger
    '06 Dodge Ram 1500 Hemi
    Army Vet
    1984-1992
    Wrench, Wheel, Wreck, Repeat!

    Offline Toyradio

    • Chapter Redneck - Instigator
    • Vendor
    • RCC Nut
    • *
    • Posts: 11645
    • Gender: Male
    • Follow me if you can. Now, don't get skeered
    Re: CB Radios and Equipment
    « Reply #6 on: May 12, 2006, 12:09:25 PM »
    Yes, we cant Just ley me know what and how many.
    1991 Ramcharger 4x4 Stock for now
    88 Suzuki Samurai Lifted
    84 Chevy 1/2 ton 408 Stroker lifted, 60's/14 bolt 39.5 locked
    82 Chevy 350/700R / 208 TC, Dana 44HD/14 Bolt, 44" Ground Hawgs
    1990 Dodge 1500 Project/daily driver to be
    82 Chevy Parts truck 350 w/turbo 350 /208
    stock 4x4

    Offline phoenix827

    • Ct Chapter VP, RCC Chapter Slut
    • RCC Nut
    • *******
    • Posts: 10940
    • Gender: Male
    • This is my BOOM stick!!
    Re: CB Radios and Equipment
    « Reply #7 on: May 12, 2006, 09:11:59 PM »
    Hmm, Missed this! lol Not really looking right now, but I Do need a decent/cheap antenna. Gonna get knocked off on trees so I think I will just go cheap. (to match the cheap radio!) ;D
    What good does it do to protect the forests from tire prints if you are just going to replace them with septic tanks?

    Quote from ChrisKD,
    "Provided i don't get Mauled by a Unicorn or kicked in the nuts by some other fairytale creature, the truck should be running this weekend." :)

    Offline Toyradio

    • Chapter Redneck - Instigator
    • Vendor
    • RCC Nut
    • *
    • Posts: 11645
    • Gender: Male
    • Follow me if you can. Now, don't get skeered
    Re: CB Radios and Equipment
    « Reply #8 on: May 15, 2006, 03:49:58 AM »
    You could get a Wilson Flex Whip or a K-40 Flex Whip. Both are excelent for a 4 wheel drive that goes into the brush/trees. You can break them if you really try, but I've had good luck with them over the years. There are a couple imatators out there, but they don't perform as well.
    1991 Ramcharger 4x4 Stock for now
    88 Suzuki Samurai Lifted
    84 Chevy 1/2 ton 408 Stroker lifted, 60's/14 bolt 39.5 locked
    82 Chevy 350/700R / 208 TC, Dana 44HD/14 Bolt, 44" Ground Hawgs
    1990 Dodge 1500 Project/daily driver to be
    82 Chevy Parts truck 350 w/turbo 350 /208
    stock 4x4

    Offline phoenix827

    • Ct Chapter VP, RCC Chapter Slut
    • RCC Nut
    • *******
    • Posts: 10940
    • Gender: Male
    • This is my BOOM stick!!
    Re: CB Radios and Equipment
    « Reply #9 on: May 15, 2006, 03:57:58 AM »
    Are they real flexy? Or are they fairly stiff? How tall? Trying not to do a "spotter whip" here. ::) Ballpark price with shipping? (06790)
    What good does it do to protect the forests from tire prints if you are just going to replace them with septic tanks?

    Quote from ChrisKD,
    "Provided i don't get Mauled by a Unicorn or kicked in the nuts by some other fairytale creature, the truck should be running this weekend." :)

    Offline Toyradio

    • Chapter Redneck - Instigator
    • Vendor
    • RCC Nut
    • *
    • Posts: 11645
    • Gender: Male
    • Follow me if you can. Now, don't get skeered
    Re: CB Radios and Equipment
    « Reply #10 on: May 15, 2006, 05:26:41 PM »
    You can get them in either 3' or 4' length. You can take them and bend them so they will touch end to end and not break.Like anything you can break them if you try hard enough. They usually sell for about 24.95 plus whatever the shipping would be. Maybe less if I can get them in bulk.
    1991 Ramcharger 4x4 Stock for now
    88 Suzuki Samurai Lifted
    84 Chevy 1/2 ton 408 Stroker lifted, 60's/14 bolt 39.5 locked
    82 Chevy 350/700R / 208 TC, Dana 44HD/14 Bolt, 44" Ground Hawgs
    1990 Dodge 1500 Project/daily driver to be
    82 Chevy Parts truck 350 w/turbo 350 /208
    stock 4x4

    Offline phoenix827

    • Ct Chapter VP, RCC Chapter Slut
    • RCC Nut
    • *******
    • Posts: 10940
    • Gender: Male
    • This is my BOOM stick!!
    Re: CB Radios and Equipment
    « Reply #11 on: May 15, 2006, 05:34:07 PM »
    you got a pm!! ;D
    Mag mount or bolt-on? Does it come with coax?
    « Last Edit: May 15, 2006, 05:39:47 PM by phoenix827 »
    What good does it do to protect the forests from tire prints if you are just going to replace them with septic tanks?

    Quote from ChrisKD,
    "Provided i don't get Mauled by a Unicorn or kicked in the nuts by some other fairytale creature, the truck should be running this weekend." :)

    Offline rampar410

    • rampar410
    • Lifetime Supporter
    • Full Member
    • *
    • Posts: 1276
    • Gender: Male
    • if it,s good mopar made it first
    Re: CB Radios and Equipment
    « Reply #12 on: October 2, 2006, 10:35:43 AM »
      skip i have 5-6  what would be the check out price
         quinn
    quinn¬ 
    19774x4 w/ 400 fulltime 31.10.50.1989 4x4w/360 305-70x16 auto -85 2x4w/ 95 360 w/ blower& 20 " wheels 1987 RC 360 STOCK W/ 33`12.50X15¬  94 v10 stock headers¬  pro mufflers dosent need anything else..¬ ¬  200000k mi still strong

    Offline RamTough2

    • RCC Rookie
    • **
    • Posts: 449
    • Gender: Female
    • If you are going to do it - Do it in the MUD!!!
    Re: CB Radios and Equipment
    « Reply #13 on: October 2, 2006, 05:35:22 PM »
    skip i have 5-6 what would be the check out price
     quinn
    Eqplaine to me just what you are asking. Remember Quinn, I'm getting old.    lol
    Whats mine is mine, and what's his is mine too!
    88 Suzuki Sammi spoa lift on TSL Super Swampers

    Offline Taz_man440

    • Sr. Member
    • *****
    • Posts: 4049
    • Gender: Male
    • So many projects, so little time..
    Re: CB Radios and Equipment
    « Reply #14 on: October 6, 2006, 10:00:31 PM »
    Skip.. what would ya sel the "patriot" antenna's for?
    1)82 Ramcharger build in progress
    2)2006 Quad 1500 HEMI
    3)2012 Durango HEMI

    Offline Toyradio

    • Chapter Redneck - Instigator
    • Vendor
    • RCC Nut
    • *
    • Posts: 11645
    • Gender: Male
    • Follow me if you can. Now, don't get skeered
    Re: CB Radios and Equipment
    « Reply #15 on: October 6, 2006, 11:53:53 PM »
    To RCC members cost plus shipping. Whatever they cost me plus the shipping. Is that fair enough.
    1991 Ramcharger 4x4 Stock for now
    88 Suzuki Samurai Lifted
    84 Chevy 1/2 ton 408 Stroker lifted, 60's/14 bolt 39.5 locked
    82 Chevy 350/700R / 208 TC, Dana 44HD/14 Bolt, 44" Ground Hawgs
    1990 Dodge 1500 Project/daily driver to be
    82 Chevy Parts truck 350 w/turbo 350 /208
    stock 4x4

    Offline hauliday

    • Newbie
    • *
    • Posts: 51
    • Gender: Male
    Re: CB Radios and Equipment
    « Reply #16 on: October 7, 2006, 12:59:56 AM »
    where is your shop at?

    No act of kindness, no matter how small, is ever wasted.

    Offline High-Tech Redneck

    • I may grow old, but I refuse to Grow Up!!
    • Lifetime Supporter
    • Full Member
    • *
    • Posts: 1503
    • Gender: Male
      • Facebook
    Re: CB Radios and Equipment
    « Reply #17 on: October 10, 2006, 01:14:09 PM »
    Where is Highlands at. Too lazy to look at map. Can I get my big-rig near there.                                       Robert
    '86 Dodge Ramcharger
    '06 Dodge Ram 1500 Hemi
    Army Vet
    1984-1992
    Wrench, Wheel, Wreck, Repeat!

    Offline Toyradio

    • Chapter Redneck - Instigator
    • Vendor
    • RCC Nut
    • *
    • Posts: 11645
    • Gender: Male
    • Follow me if you can. Now, don't get skeered
    Re: CB Radios and Equipment
    « Reply #18 on: October 10, 2006, 03:48:57 PM »
    No problem. We have 4 large truck stops within one mile of the shop/house. I-10 and Thompson Rd....T/A, Valero, Connoco, and a Pilot. Highlands is east of Houston, west of Baytown on I-10
    1991 Ramcharger 4x4 Stock for now
    88 Suzuki Samurai Lifted
    84 Chevy 1/2 ton 408 Stroker lifted, 60's/14 bolt 39.5 locked
    82 Chevy 350/700R / 208 TC, Dana 44HD/14 Bolt, 44" Ground Hawgs
    1990 Dodge 1500 Project/daily driver to be
    82 Chevy Parts truck 350 w/turbo 350 /208
    stock 4x4

    Offline High-Tech Redneck

    • I may grow old, but I refuse to Grow Up!!
    • Lifetime Supporter
    • Full Member
    • *
    • Posts: 1503
    • Gender: Male
      • Facebook
    Re: CB Radios and Equipment
    « Reply #19 on: October 10, 2006, 08:24:14 PM »
    No problem. We have 4 large truck stops within one mile of the shop/house. I-10 and Thompson Rd....T/A, Valero, Connoco, and a Pilot. Highlands is east of Houston, west of Baytown on I-10
    Cool will definitely get a hold of you when I'm down that way again.Thx.                                      Robert
    '86 Dodge Ramcharger
    '06 Dodge Ram 1500 Hemi
    Army Vet
    1984-1992
    Wrench, Wheel, Wreck, Repeat!

    Offline driverams

    • Jr. Member
    • ***
    • Posts: 535
    • Gender: Male
    • If ya cant catch it ya cant piss on it!!!!!!!
    Re: CB Radios and Equipment
    « Reply #20 on: December 28, 2006, 09:24:12 AM »
    can i get one thats turned up in power?i know its not legal in some states but was wondering?and do you have a website?
    2005 RAM2500 QUAD CAB CUMMINS DIESEL 4WD 410 GEARS AND POSI.SMALL LIFT 295X70X18 PRO COMPS ON ALUM WHEELS

    Offline horntoad11

    • Full Member
    • ****
    • Posts: 1568
    • Gender: Male
    • MOPAR'S RULE AND FORDS ARE PULLED OUT OF THE WATER
    Re: CB Radios and Equipment
    « Reply #21 on: January 14, 2007, 04:23:56 PM »
    can i get one thats turned up in power?i know its not legal in some states but was wondering?and do you have a website?
    gee ifi remember its not legal in any state!! is it still 4 watts for am and 12 for ssb?....but anyway..........every radio i own,is illegal...........even my old 23 channel,is a sweet talker
    1986 RC150 Royal SE 360 ci.4bbl.duals...31x10.50x15  timberlines..
    1993 RC LE 360 magnum,fi auto,16"tires 3:55 rear locked,loade

    Offline RED90RC

    • I drive it like I stole it
    • Mopar Nut
    • ******
    • Posts: 9511
    • Gender: Male
      • Curtis's Dodge: Steve A.K.A. The Red Ryder
    Re: CB Radios and Equipment
    « Reply #22 on: January 17, 2007, 03:23:16 PM »
    Do you stock any of those CB setups that is just a handheld mic type...I think cobra makes em...I want to put a CB in my VW but want something low profile...
    2001 Volvo V40 1.9t

    Mopar or no car...
    "I reject your reality and substitue my own..."
    "I aim to misbehave"

    Thank you Sam for all of this...
    Vote third party...unless you enjoy being a sheep..

    Online Trailduster79

    • Global Moderator
    • Mopar Nut
    • *****
    • Posts: 5098
    • Gender: Male
    • Got 60?
    Re: CB Radios and Equipment
    « Reply #23 on: March 1, 2007, 11:40:31 AM »
    Wish I had seen this post a long time ago.

    How about a decent external speaker?

    Will also be interested in about a 4' whip antenna for my sammy.

    79 Trailduster 360-727-NP203/NP205/60's38.5 SX's (440 Coming Eventually)

    06 3500 QC LB 4x4 Auto Muffler Delete,Juice with Attitude, Billet Trans, AEM water/meth, Autometer boost gauge

    Offline Ollywood00

    • Mopar Nut
    • ******
    • Posts: 5736
    • Gender: Male
    Re: CB Radios and Equipment
    « Reply #24 on: March 3, 2007, 04:09:57 PM »
    Email sent Toyradio!

    Olly
    Boycott "Made In China!"
    Out of a job yet?  Keep buying foreign!

    Offline Sam Simpson

    • Founder
    • Administrator
    • RCC Addict
    • *****
    • Posts: 26947
    • Gender: Male
    • It's not what you BUY, It's what you BUILD!
      • topsocialmediajobs.com
    Re: CB Radios and Equipment
    « Reply #25 on: March 4, 2007, 12:10:31 AM »
    Might want to send him a PM too, I don't think he has looked at this post since his last reply.

    Offline Ollywood00

    • Mopar Nut
    • ******
    • Posts: 5736
    • Gender: Male
    Re: CB Radios and Equipment
    « Reply #26 on: March 8, 2007, 11:17:43 PM »
    Thanks Sam!

    Olly
    Boycott "Made In China!"
    Out of a job yet?  Keep buying foreign!

    Offline Ollywood00

    • Mopar Nut
    • ******
    • Posts: 5736
    • Gender: Male
    Re: CB Radios and Equipment
    « Reply #27 on: March 8, 2007, 11:19:57 PM »
    Pm Sent Toyradio!

    Olly
    Boycott "Made In China!"
    Out of a job yet?  Keep buying foreign!

    Offline Toyradio

    • Chapter Redneck - Instigator
    • Vendor
    • RCC Nut
    • *
    • Posts: 11645
    • Gender: Male
    • Follow me if you can. Now, don't get skeered
    Re: CB Radios and Equipment
    « Reply #28 on: August 10, 2007, 02:10:02 PM »
    Been busy lately with two jobs and trying to finish a project. If I missed anyone e-mail I'm sorry.Taz you and I already had this conversation.
    1991 Ramcharger 4x4 Stock for now
    88 Suzuki Samurai Lifted
    84 Chevy 1/2 ton 408 Stroker lifted, 60's/14 bolt 39.5 locked
    82 Chevy 350/700R / 208 TC, Dana 44HD/14 Bolt, 44" Ground Hawgs
    1990 Dodge 1500 Project/daily driver to be
    82 Chevy Parts truck 350 w/turbo 350 /208
    stock 4x4

    Offline Crazz34

    • Newbie
    • *
    • Posts: 13
    • Gender: Male
    • RCC Rules!
      • OldSkoolVans
    Re: CB Radios and Equipment
    « Reply #29 on: December 24, 2007, 09:01:17 PM »
    what kind of price can you get on a general lee ?

    Offline livinginh

    • Newbie
    • *
    • Posts: 201
    • Gender: Male
    • RCC Rules!
    Re: CB Radios and Equipment
    « Reply #30 on: February 21, 2008, 06:45:58 PM »
    I have a DX88HL and a DX99V, the 88 is off freq, when on 19 it is reading 27.180, no fine tunning will get it any closer to 27.185. Was told it more then likely will need a new PLL board, then tuned and realigned. Do you do this work and if so what price are we looking at?
    1976 RamCharger, SE 400 Auto, 4x4<br />1997 Ram 1500 Sport, 360 Magnum, Auto

    Offline Toyradio

    • Chapter Redneck - Instigator
    • Vendor
    • RCC Nut
    • *
    • Posts: 11645
    • Gender: Male
    • Follow me if you can. Now, don't get skeered
    Re: CB Radios and Equipment
    « Reply #31 on: January 23, 2009, 11:19:18 PM »
    Been busy. Shop newly opened. Got rid of other job . Back to doing only radios. Don't have a web site as of yet. But have talked to Sam and taking his advice. Shop is open and running. making orders for materials and sypplies. Have about 20 radios in stock.Ph # is 281-669-6309. Open from 8 am till ?Pm me here at RCC or IM me at Toyradio@aol.com. Thanks guys if I can be of any service just let us know. We have a full service shop. We will be shipping things as well.
    1991 Ramcharger 4x4 Stock for now
    88 Suzuki Samurai Lifted
    84 Chevy 1/2 ton 408 Stroker lifted, 60's/14 bolt 39.5 locked
    82 Chevy 350/700R / 208 TC, Dana 44HD/14 Bolt, 44" Ground Hawgs
    1990 Dodge 1500 Project/daily driver to be
    82 Chevy Parts truck 350 w/turbo 350 /208
    stock 4x4

    Offline Blasphemous

    • Jr. Member
    • ***
    • Posts: 566
    • Gender: Male
    Re: CB Radios and Equipment
    « Reply #32 on: February 24, 2009, 11:56:31 PM »
    I'm glad I seen this thread.  I have a RC I want to get a CB setup put in.  I don't have anything to start, it'll be from scratch.  If you have time, can you PM me a price for a full kit?  To start, I need to "cheap out" on it, but I'd like to get a large whip style antenna.  The kind you'd see on a military Hummer, they're probably 5'-6' long?  Also, on the main unit... I'd like to have one with knobs and the analog style swr/power meter.
    1979 Dodge Ramcharger - 318 / 4-speed
    Bone stock on 31's

    Offline dodgeMYCHOICE

    • Newbie
    • *
    • Posts: 59
    • Gender: Male
    Re: CB Radios and Equipment
    « Reply #33 on: May 4, 2009, 11:56:22 PM »
    I HAVE A GALAXY 929 WITH A 102 INCH WHIP TALK ON IT EVERY DAY BREAKER 19 8)

    Offline Toyradio

    • Chapter Redneck - Instigator
    • Vendor
    • RCC Nut
    • *
    • Posts: 11645
    • Gender: Male
    • Follow me if you can. Now, don't get skeered
    Re: CB Radios and Equipment
    « Reply #34 on: May 5, 2009, 09:31:36 AM »
    I have a Galaxy 66 in the RC which I really like. Also a Galaxy 88 in the Ford. I have a couple more that I switch out from time to time just for the heck of it.
    1991 Ramcharger 4x4 Stock for now
    88 Suzuki Samurai Lifted
    84 Chevy 1/2 ton 408 Stroker lifted, 60's/14 bolt 39.5 locked
    82 Chevy 350/700R / 208 TC, Dana 44HD/14 Bolt, 44" Ground Hawgs
    1990 Dodge 1500 Project/daily driver to be
    82 Chevy Parts truck 350 w/turbo 350 /208
    stock 4x4

    Offline grizzssly

    • mass co-leader
    • Jr. Member
    • ***
    • Posts: 616
    • Gender: Male
    • make me some snow so i can go ride the sleds
    Re: CB Radios and Equipment
    « Reply #35 on: June 8, 2010, 12:33:32 PM »
    do people actually get there radio's back that send them to you, or do we all get screwed. (yup im pretty pissed off, $350 radio that he prolly has in his car or sold on me,)
    98 ram 1/2 ton 4x4 (with a plow)
    79 gmc 4x4
    2001 suzuki intruder VL1500 cruiser
    2006 ski-doo 500ss, actually a 600
    1999 yamaha mountain max 700triple
    1996 polaris sportsman 400

    Offline DODGEBOYS

    • DODGEBOYS.NET / RCC Signiture Police
    • RCC Addict
    • ********
    • Posts: 24435
    • Gender: Male
    • show me the Flame and l might see the light
      • DODGE TRUCKS @ DODGEBOYS.NET
    Re: CB Radios and Equipment
    « Reply #36 on: June 19, 2010, 06:24:56 AM »
    do people actually get there radio's back that send them to you, or do we all get screwed. (yup im pretty pissed off, $350 radio that he prolly has in his car or sold on me,)


    DAN you still aint got that radio back / its been what a couple 3 years now
    put your truck info HERE
    MOPAR TO YA! AARON HOWORD TOWNSEND / SLANTEDMIND---GOD BLESSDODGEBOYS FSM STORE
    ramchargercentral@hotmail.com
    DO NOT use the site IM,s to contact me  l have them turned OFF

    Offline Sam Simpson

    • Founder
    • Administrator
    • RCC Addict
    • *****
    • Posts: 26947
    • Gender: Male
    • It's not what you BUY, It's what you BUILD!
      • topsocialmediajobs.com
    Re: CB Radios and Equipment
    « Reply #37 on: June 19, 2010, 02:34:10 PM »
    You need to post your issue in the Member feedback board and let him know you did.  Then we can go from there.

    Offline grizzssly

    • mass co-leader
    • Jr. Member
    • ***
    • Posts: 616
    • Gender: Male
    • make me some snow so i can go ride the sleds
    Re: CB Radios and Equipment
    « Reply #38 on: June 23, 2010, 05:43:27 PM »
    yup ill do that soon, thanx sam,
    98 ram 1/2 ton 4x4 (with a plow)
    79 gmc 4x4
    2001 suzuki intruder VL1500 cruiser
    2006 ski-doo 500ss, actually a 600
    1999 yamaha mountain max 700triple
    1996 polaris sportsman 400

    Offline KIM Class

    • Newbie
    • *
    • Posts: 1
    • KIM Class Rules!
      • KIM Classifieds
    Re: CB Radios and Equipment
    « Reply #39 on: November 11, 2012, 09:33:17 PM »
    Do you have any ham radios.  My brother is big into ham radios and contests.  I was looking to get him a 2 meter handheld radio for Christmas.  Just get back with me and let me know.  Thanks.


    Offline Toyradio

    • Chapter Redneck - Instigator
    • Vendor
    • RCC Nut
    • *
    • Posts: 11645
    • Gender: Male
    • Follow me if you can. Now, don't get skeered
    Re: CB Radios and Equipment
    « Reply #40 on: May 5, 2013, 10:35:16 AM »
    No ham radio quipment.
    1991 Ramcharger 4x4 Stock for now
    88 Suzuki Samurai Lifted
    84 Chevy 1/2 ton 408 Stroker lifted, 60's/14 bolt 39.5 locked
    82 Chevy 350/700R / 208 TC, Dana 44HD/14 Bolt, 44" Ground Hawgs
    1990 Dodge 1500 Project/daily driver to be
    82 Chevy Parts truck 350 w/turbo 350 /208
    stock 4x4

    Offline puttputt56

    • Mopar Nut
    • ******
    • Posts: 5246
    • Gender: Male
    • RCC Rules!
      • MyCoolCustom.com
    Re: CB Radios and Equipment
    « Reply #41 on: July 28, 2013, 08:30:43 PM »
    Toyradio have a question which I hope you can answer for me.  My CB antenna (red short 36" I believe) (like the ones the 18 wheelers use) the end plastic slip cover keeps melting, what is causing this??  puttputt56
    Pictures of my 56 are located here
    www.Search4Jeeps.com

    Offline Skwerly

    • Full Member
    • ****
    • Posts: 2346
    • Gender: Male
    • I work at Auto Zone
      • Derek Odom Author
    Re: CB Radios and Equipment
    « Reply #42 on: July 29, 2013, 04:37:57 PM »
    is your shop the one behind that TA off the Ten that hits up the airways with 'THE RADIOOOOOO SHOP'? 

    i've been there, good stuff.

    i ran a relatively short Firestik on my jeep and it did okay, but i think i'll go with something long and thin for the ramcharger.  i like a little distance.
    1978 pop-top SE, 440, junkyard built.  :D

    Offline Skwerly

    • Full Member
    • ****
    • Posts: 2346
    • Gender: Male
    • I work at Auto Zone
      • Derek Odom Author
    Re: CB Radios and Equipment
    « Reply #43 on: October 26, 2014, 11:53:55 AM »
    Come again, good buddy?

    (see wat i did there?)  :D
    1978 pop-top SE, 440, junkyard built.  :D

    Offline NastyR/C

    • Newbie
    • *
    • Posts: 5
    • Gender: Male
    • RCC Rules!
    Re: CB Radios and Equipment
    « Reply #44 on: November 3, 2014, 08:38:29 PM »
    Hey bub I'm lookin for a 15ft whip antenna to go on my Ram350 so I can bow to the cab. I have 10ft one but it ain't long enuf to reach the cab.
         THANKS.    Dan.
    Always looking for parts or trucks.

    Offline Elwenil

    • Militant Parts Guy
    • Global Moderator
    • RCC Addict
    • *****
    • Posts: 26033
    • Gender: Male
    • I am the voice of reason in an unreasonable world.
    Re: CB Radios and Equipment
    « Reply #45 on: November 3, 2014, 09:53:24 PM »
    An antenna that long would be pointless for a CB.  A 102" stainless whip is more than enough.  Plus tying it down cuts it's performance and if you tie it down wrong, you simply ground it out and burn up the radio when you transmit.
    L.Clemons

    1988 Ramcharger-Mil-Spec AW450 Project-318EFI-NP435 4 speed-NP205 Transfer Case-Front & Rear Dana 60s-Braden Wormdrive Front Winch
    I do not like shortcuts.  Any job worth doing is worth doing right.

    Auribus Tenere Lupum

    Offline Skwerly

    • Full Member
    • ****
    • Posts: 2346
    • Gender: Male
    • I work at Auto Zone
      • Derek Odom Author
    Re: CB Radios and Equipment
    « Reply #46 on: November 3, 2014, 10:00:20 PM »
    An antenna that long would be pointless for a CB.  A 102" stainless whip is more than enough.  Plus tying it down cuts it's performance and if you tie it down wrong, you simply ground it out and burn up the radio when you transmit.

    haha, I had the same thought but kept mum til i saw you reply.  :D
    1978 pop-top SE, 440, junkyard built.  :D