4 Wheel Parts
4WD
ALLDATAdiy
JC Whitney
http://www.carid.com/ http://www.carid.com/dodge-ramcharger-parts/ http://www.carid.com/custom-wheels.html http://www.carid.com/truck-accessories.html http://www.carid.com/rugged-ridge/


Author Topic: Door lock actuator  (Read 2536 times)

0 Members and 1 Guest are viewing this topic.

Offline Ram1985Custom

  • Sr. Member
  • *****
  • Posts: 2864
  • Gender: Male
  • YUP
Door lock actuator
« on: May 2, 2005, 12:52:40 AM »
Where can I get a drivers side door lock actuator at?  I've checked ebay, but couldn't find one.  New or used, I don't care as long as it works....1984 RC
1985 Ram long bed 4x4- Rebuilt 318/727. D44/9.25, 3.23's, Mud Rovers, soon to be lifted and on 35's
1984 RC 4x4- 318/727. D44/9.25, 3.23's.  4 inch suspension lift, Rancho RS5000 shocks and stab. 33x12.50's on 15x10's.
2004 Pontiac Grand AM SE 2.2L

Offline RED90RC

  • I drive it like I stole it
  • Mopar Nut
  • ******
  • Posts: 9512
  • Gender: Male
    • Curtis's Dodge: Steve A.K.A. The Red Ryder
Re:Door lock actuator
« Reply #1 on: May 2, 2005, 01:03:17 AM »
Junkyard...
2001 Volvo V40 1.9t

Mopar or no car...
"I reject your reality and substitue my own..."
"I aim to misbehave"

Thank you Sam for all of this...
Vote third party...unless you enjoy being a sheep..

Offline DODGEBOYS

  • DODGEBOYS.NET / RCC Signiture Police
  • RCC Addict
  • ********
  • Posts: 22032
  • Gender: Male
  • show me the Flame and l might see the light
    • DODGE TRUCKS @ DODGEBOYS.NET
RE: Door lock actuator
« Reply #2 on: May 2, 2005, 10:31:07 AM »
right in the HELP/Dorman section of your favorite parts store under part number # 75653
put your truck info HERE
MOPAR TO YA! AARON HOWORD TOWNSEND / SLANTEDMIND---GOD BLESSDODGEBOYS FSM STORE
ramchargercentral@hotmail.com
DO NOT use the site IM,s to contact me  l have them turned OFF

Offline Ram1985Custom

  • Sr. Member
  • *****
  • Posts: 2864
  • Gender: Male
  • YUP
RE: Door lock actuator
« Reply #3 on: May 2, 2005, 05:17:43 PM »
Good deal {cool}
1985 Ram long bed 4x4- Rebuilt 318/727. D44/9.25, 3.23's, Mud Rovers, soon to be lifted and on 35's
1984 RC 4x4- 318/727. D44/9.25, 3.23's.  4 inch suspension lift, Rancho RS5000 shocks and stab. 33x12.50's on 15x10's.
2004 Pontiac Grand AM SE 2.2L

Offline Ram

  • Sr. Member
  • *****
  • Posts: 2516
  • Gender: Male
    • Top 10 Weasels
RE: Door lock actuator
« Reply #4 on: May 2, 2005, 05:36:23 PM »

right in the HELP/Dorman section of your favorite parts store under part number # 75653


1996-2002 Chrysler, Dodge & Plymouth Mini Vans; Fits Sliding Door, part number and mfg: Motormite 75653

I'm not sure that this is the part that your looking for a 1984 RC. It maybe modified, but this is not it!  
1986 Dodge Ramcharger Royal SE 4x4, 360 auto

Offline Ram1985Custom

  • Sr. Member
  • *****
  • Posts: 2864
  • Gender: Male
  • YUP
Re:Door lock actuator
« Reply #5 on: May 2, 2005, 08:08:35 PM »
Well I went to the local parts store and I found GM/Jeep actuators and Ford actuators in the HELP section.  The parts guy called motormite and they said that they don't make them for my application.  The motormite book only lists 96 and newer chrysler applications
1985 Ram long bed 4x4- Rebuilt 318/727. D44/9.25, 3.23's, Mud Rovers, soon to be lifted and on 35's
1984 RC 4x4- 318/727. D44/9.25, 3.23's.  4 inch suspension lift, Rancho RS5000 shocks and stab. 33x12.50's on 15x10's.
2004 Pontiac Grand AM SE 2.2L

Offline offroader_dodge

  • red seal/interprovincial licenced auto technician,safety certified
  • Sr. Member
  • *****
  • Posts: 3506
  • Gender: Male
  • rebuildin the world with scrap metal and duct tape
RE: Door lock actuator
« Reply #6 on: May 2, 2005, 09:53:48 PM »
just buy a heavy duty universal door lock motor and retrofit,i paid 10 dollars for the good one.done it often,and they work just as good,i dont care if they puke after a while for 10 bucks.
80 power wagon 318 short box /macho package 35x12.50 DUNLOP RVXT\\\'s 4\\\" RCC LIFT,<br />.Many thanks to all the helpful members of this site.Dream job:fixing atvs and other toys,small engines building stuff with all the tools.copter and float plane rides mandatory

Offline georgeda

  • Jr. Member
  • ***
  • Posts: 929
  • Gender: Male
  • RamchargerCentr al.Com Rules!
RE: Door lock actuator
« Reply #7 on: May 3, 2005, 05:42:54 AM »
You can use an actuator from a GM car you get at the salvage yard (keep the plug and as much of the wire as you can).  A couple new holes to mount it, a homemade rod to connect it and connect the wires.
85 RC 150 Royal SE, 727, 318 2bbl, 2wd. Owned since new. All the factory options except snow plow. Air shocks in rear to help soft springs when towing.

Offline Ram

  • Sr. Member
  • *****
  • Posts: 2516
  • Gender: Male
    • Top 10 Weasels
RE: Door lock actuator
« Reply #8 on: May 3, 2005, 05:57:19 AM »
I have a number for that part for an 86 RC, if you have a dealer with the ability to get a hold of new old stock.
4330448-0
I'm pretty certian that this part number is the same for many of the years, if not it may be just a change in the electrical connector.

I know that you can find the same door lock solenoid at the junk yard in vans and several other of the full size Dodges.
1986 Dodge Ramcharger Royal SE 4x4, 360 auto

Offline dbgil

  • RCC Rookie
  • **
  • Posts: 298
  • Gender: Male
  • RamchargerCentral.Com Rules!
RE: Door lock actuator
« Reply #9 on: May 3, 2005, 06:49:06 PM »
I used universal locks which cost $10 as someone else said.  I built a bracket to hold them so that you could use the existing holes that hold the old actuator on to mount the bracket.  The bracket also positions the lock more in line with the connecting rod which makes it work a little better.  I have pics of the bracket and dimensions, etc. if you like.  Just IM me and I will send them to you.

David
2005 Dodge Ram 2500 Quad Cab, Cummins TD, 4 x 2, 3.73 limited slip differential.
1987 Dodge Ramcharger 4 x 4, 318, 3.22

Offline Ram

  • Sr. Member
  • *****
  • Posts: 2516
  • Gender: Male
    • Top 10 Weasels
RE: Door lock actuator
« Reply #10 on: May 3, 2005, 07:40:09 PM »

I used universal locks which cost $10 as someone else said.  I built a bracket to hold them so that you could use the existing holes that hold the old actuator on to mount the bracket.  The bracket also positions the lock more in line with the connecting rod which makes it work a little better.  I have pics of the bracket and dimensions, etc. if you like.  Just IM me and I will send them to you.

David



Sounds like a good How-2, input!
1986 Dodge Ramcharger Royal SE 4x4, 360 auto

Offline Chump

  • Site Assistant
  • Mopar Nut
  • *****
  • Posts: 8017
  • Gender: Male
  • Buy a Factory Service Manual and Read It!PHD in BS
RE: Door lock actuator
« Reply #11 on: May 4, 2005, 02:44:00 AM »
« Last Edit: May 4, 2005, 02:45:28 AM by Chump »
If you have no time to answer the questions or try the advice then don't expect to fix it anytime soon!


Offline offroader_dodge

  • red seal/interprovincial licenced auto technician,safety certified
  • Sr. Member
  • *****
  • Posts: 3506
  • Gender: Male
  • rebuildin the world with scrap metal and duct tape
RE: Door lock actuator
« Reply #12 on: May 4, 2005, 08:20:43 AM »
there are choices for them,i reccomend using the so-called heavy duty ones,as they arent the rack and pinion-type,i think they are a spiral gear setup,more similar to oe applications,and better in the cold weather.
80 power wagon 318 short box /macho package 35x12.50 DUNLOP RVXT\\\'s 4\\\" RCC LIFT,<br />.Many thanks to all the helpful members of this site.Dream job:fixing atvs and other toys,small engines building stuff with all the tools.copter and float plane rides mandatory

Offline 85beast

  • Newbie
  • *
  • Posts: 18
  • Gender: Male
  • Only in a Dodge can you look COOL
RE: Door lock actuator
« Reply #13 on: May 4, 2005, 08:25:34 PM »
on your left elbow, its really cheap.

 

email