Author Topic: Frame Dimensions and Differences  (Read 16926 times)

0 Members and 1 Guest are viewing this topic.

Offline tv_larsen

  • the Hammer
  • Global Moderator
  • Mopar Nut
  • *****
  • Posts: 8231
  • Gender: Male
  • Mud Sucks!
    • Mopars & 4x4's
Frame Dimensions and Differences
« on: June 27, 2004, 04:12:17 PM »
From the 1977 FSM courtesy of 91PowerRam.

Ramcharger
front frame--29.88" wide outside of frame rails
4.00" tall inside the frame rail
rear frame--37.68" wide outside of frame rails
5.55" tall inside the frame rails
side rail section--6.06" tall
2.27" flange
0.156" gage (thickness)

D100-D400
front frame--30.30" wide outside of frame rails
4.00" tall inside the frame rail
rear frame--37.68" wide outside of frame rails
5.55" tall inside the frame rails
siderail section --6.06" to 7.20" tall depending on body style
2.27" to 2.79" flange depending on body style
0.156" to 0.250" gage (thickness) depending on body style


W150-W400
front frame--29.88" wide outside of frame rails
4.00" tall inside the frame rail
rear frame--37.68" wide outside of frame rails
5.55" tall inside the frame rails
siderail section --6.06" to 7.20" tall depending on body style
2.27" to 2.79" flange depending on body style
0.156" to 0.250" gage (thickness) depending on body style
« Last Edit: June 27, 2004, 04:12:51 PM by tv_larsen »
2001 Dakota Quadcab - 3.9L V6, Dana 60/10.25", ARB/Detroit, 5.38 gears, 37" MTR's
1998 Ram 2500 Club Cab - 5.9L 12 valve, Dana 60/70, 3.55 gears, DTT 47RE, ~355HP/781FT-LB
1975 W200 Club Cab - 440, 727, Dana 60's,  4.10 gears - slow motion CTD swap
1969 Roadrunner - 383, 727, 8.75", 3.21 gears

Offline tv_larsen

  • the Hammer
  • Global Moderator
  • Mopar Nut
  • *****
  • Posts: 8231
  • Gender: Male
  • Mud Sucks!
    • Mopars & 4x4's
Re: Frame Dimensions and Differences
« Reply #1 on: May 31, 2008, 06:38:37 PM »
Frame specifications from the 1975 FSM.

ModelWheel Base   Depth   Flange Width   Rail Gage   Section Modulus   R.B.M.*   Rear Overhang
Conv. Cab
D1001156.062.27.1562.869152038.25
D1001316.062.27.1562.869152042.25
D2001316.172.32.2103.8812416042.25
D2/300 HD1317.202.73.1945.0216064042.25
D3001357.202.73.1945.0216064042.25
D3001597.312.79.2506.5616064048.25
W1001156.122.30.1883.4310976038.25
W1/2001316.172.32.2103.8812416042.25
W3001257.202.73.1945.0216064048.25
Club Cab
D1001337.162.72.1764.5714624038.25
D1/2001497.202.73.1945.0216064042.25
D3001497.232.75.2105.4717504042.25
W1001337.182.72.1884.7515200038.25
W1/2001497.232.75.2105.4717504042.25
Crew Cab
D2001497.202.73.1945.0216064038.25
D2/3001657.312.79.2506.5620992042.25
W2001497.202.73.1945.0216064038.25

*Resisting Bending Moment based on 32000 psi minimum yield strength of siderail steel.
2001 Dakota Quadcab - 3.9L V6, Dana 60/10.25", ARB/Detroit, 5.38 gears, 37" MTR's
1998 Ram 2500 Club Cab - 5.9L 12 valve, Dana 60/70, 3.55 gears, DTT 47RE, ~355HP/781FT-LB
1975 W200 Club Cab - 440, 727, Dana 60's,  4.10 gears - slow motion CTD swap
1969 Roadrunner - 383, 727, 8.75", 3.21 gears

Offline DODGEBOYS

  • DODGEBOYS.NET / RCC Signiture Police
  • RCC Addict
  • ********
  • Posts: 22994
  • Gender: Male
  • show me the Flame and l might see the light
    • DODGE TRUCKS @ DODGEBOYS.NET
Re: Frame Dimensions and Differences
« Reply #2 on: September 2, 2008, 05:38:05 PM »
Ramcharger frame.
« Last Edit: September 3, 2008, 06:11:51 PM by tv_larsen »
put your truck info HERE
MOPAR TO YA! AARON HOWORD TOWNSEND / SLANTEDMIND---GOD BLESSDODGEBOYS FSM STORE
ramchargercentral@hotmail.com
DO NOT use the site IM,s to contact me  l have them turned OFF

Offline DODGEBOYS

  • DODGEBOYS.NET / RCC Signiture Police
  • RCC Addict
  • ********
  • Posts: 22994
  • Gender: Male
  • show me the Flame and l might see the light
    • DODGE TRUCKS @ DODGEBOYS.NET
Re: Frame Dimensions and Differences
« Reply #3 on: September 2, 2008, 05:43:19 PM »
Pick-up truck frame.
« Last Edit: September 3, 2008, 06:12:12 PM by tv_larsen »
put your truck info HERE
MOPAR TO YA! AARON HOWORD TOWNSEND / SLANTEDMIND---GOD BLESSDODGEBOYS FSM STORE
ramchargercentral@hotmail.com
DO NOT use the site IM,s to contact me  l have them turned OFF